Remote Control Functions
sTuner Mode: Press this button when the tuner is in use to select between automatic tuning and manual tuning. When the button is pressed so that the AUTO Indicator R goes out, pressing the Tuning Buttons u8 will move the frequency up or down in
tDirect Button: Press this button when the tuner is in use to start the sequence for direct entry of a station’s frequency. After press- ing the button simply press the proper Numeric Keys r to select a station. (See page 25 for more information on the tuner.)
uTuning Up/Down: When the tuner is in use, these buttons will tune up or down through the selected frequency band. If the Tuner Mode Button s@has been pressed so that the AUTO Indicator Ris illuminated, pressing and holding either of the buttons for three seconds will cause the tuner to seek the next station with acceptable signal strength for quality reception. When the AUTO Indicator Ris NOT illumi- nated, pressing these buttons will tune stations in
vMacro Buttons: Press these buttons to store or recall a “Macro”, which is a preprogrammed sequence of commands stored in the remote. (See page 28 for more information on storing and recalling macros.)
wTransport Controls: These buttons do not have any functions for the AVR 120, but they may be programmed for the forward/ reverse play operation of a wide variety of CD or DVD players, and audio or video cassette recorders. (See page 30 for more information on programming the Transport Control Punch- Through capability of the remote.)
xSkip Up/Down Button: These buttons have no direct function with the AVR 120, but when used with a compatibly programmed CD or DVD changer they will change the disc cur- rently being played in the changer.
yDisc Skip Button: This button has no direct function for the AVR 120, but is often used when the remote is programmed to oper- ate a CD or DVD changer to change the discs in the changer. (See page 28 for more information on using the remote with other devices.)
zPreset Up/Down: When the tuner is
in use, press these buttons to scroll through the stations programmed into the AVR 120’s mem- ory. When some source devices, such as CD players, VCRs and cassette decks, are selected using the device Input Selectors e, these buttons may function as Chapter Step or Track Advance.
`Clear Button: Press this button to clear incorrect entries when using the remote to directly enter a radio station’s frequency.
28Memory Button: Press this button to enter a radio station into the AVR 120’s preset memory. Once the MEMORY Indicator Oflashes, you have five seconds to enter a preset memory location using the Numeric Keys r (See page 26 for more information.)
29Delay/Prev Ch.: Press this button to begin the process for setting the delay times used by the AVR 120 when processing surround sound. After pressing this button, the delay times are entered by pressing the Set Button o and then using the ⁄/¤ Buttons mq to change the setting. Press the Set Button o again to complete the process. (See page 19 for more information.)
30› Button: Press this button to change a setting or selection when configuring many of the AVR 120’s settings.
31Speaker Select: Press this button to begin the process of configuring the AVR
120’s bass management system for use with the type of speakers used in your system. Once the button has been pressed, use the ⁄/¤ Buttons mq to select the channel you wish to set up. Press the Set Button o and then select another channel to configure. When all adjustments have been completed, press the Set Button o twice to exit the settings and return to normal operation. (See page 17 for more information.)
32Spare Button: This button does not have any function for the operation of the AVR 120, but it is available for use when programmed with the code from another remote. (See page 27 for information on programming the remote with codes for other devices.)
33Volume Up/Down: Press these buttons to raise or lower the system volume. See page 29 for more information on programming the
Volume Control
34TV/Video Selector: This button does not have a direct function on the AVR 120, but when used with a compatibly programmed VCR, DVD or satellite receiver that has a “TV/Video” function, pressing this button will switch between the output of the player or receiver and the external video input to that player. Consult the owner’s manual for your specific player or receiver for the details of how it implements this function.
35Mute: Press this button to momentarily silence the AVR 120 or TV set being controlled, depending on which device has been selected. When the AVR 120 is muted, press this button or use the Volume Control Ó 33 to return to the previous volume level. When the AVR 120 remote is being programmed to operate another device or when a macro command is being pro- grammed, this button is pressed with the Input Selector Button e to begin the program- ming process. (See page 27 for more informa- tion on programming the remote.)
