Operation
example, DTS bitstreams will cause the unit to switch to DTS decoding, and Dolby Digital bit- streams will enable Dolby Digital decoding.
When the unit senses PCM data, as is present from CDs and LDs, the unit will allow the appropriate surround sources to be selected manually. Since the range of available surround modes is dependant on the type of digital data that is present, the AVR 7000 uses a variety of indicators to let you know what type of signal is present. This will help you to understand the choice of modes.
When a digital source is playing, a Bitstream Indicator A will light to show which type of signal is playing:
AC-3: When the AC-3* indicator lights, a Dolby Digital bitstream is being received. Depending on the settings on the source player and specific surround information and number of channels on the disc, a number of surround modes are possible. For discs with full 5.1 audio, only the Dolby Digital and VMAx modes are available. When the Dolby Digital signal is only two channel, you may also select from the Logic 7 Cinema/Music, Hall, Theater, Dolby Pro Logic or Dolby 3 Stereo modes.
DTS: When the DTS indicator lights, a DTS bitstream is being received. When the unit senses this type of data, only the DTS mode may be used.
PCM: When the PCM indicator lights, a stan- dard Pulse Code Modulation, or PCM, signal is being received. This is the type of digital audio used by conventional compact disc and laser disc recordings. When a PCM bitstream is pres- ent, all modes except Dolby Digital and DTS are available.
HDCD: When the HDCD® indicator lights in conjunction with the PCM indicator, the CD that is playing is encoded through the special High Definition Compatible Digital® process. HDCD discs use 20-bit encoding and other proprietary processing to provide the ultimate in CD listen- ing. Note that HDCD processing is only avail- able in the Stereo or Surround Off mode.
In addition to the bitstream indicators, the AVR 7000 features a set of unique channel input indicators that tell you how many chan- nels of digital information are being received and if the digital signal is interrupted.
These indicators are the L/C/R/LS/RS/LFE letters that are inside the center boxes of the Speaker/Channel Input Indicators P in the front panel Information Display ñ. When a standard analog signal is in use, only the “L” and “R” indicators will light, as analog signals have only left and right channels, respectively.
Digital signals, however, may have two, five or six separate channels, depending on the pro- gram material, the method of transmission and the way in which it was encoded. When a digi- tal signal is playing, the letters in these indica- tors will light in response to the specific signal being received. It is important to note that although Dolby Digital, for example, is referred to as a “5.1” system, not all Dolby Digital DVDs or programs are encoded for 5.1. Thus, it is sometimes normal for a DVD with a Dolby Digital soundtrack to trigger only the “L” and “R” indicators.
NOTE: Many DVD discs are recorded with both “5.1” and “2.0” versions of the same sound- track. When playing a DVD, always be certain to check the type of material on the disc. Most discs show this information in the form of a listing or icon on the back of the disc jacket. When a disc does offer multiple soundtrack choices you may have to make some adjust- ments to your DVD player (usually with the “Audio Select” button or in a menu screen
on the disc) to send a full 5.1 feed to the
AVR 7000. It is also possible for the type of sig- nal feed to change during the course of a DVD playback. In some cases the previews of special material will only be recorded in 2.0 audio, while the main feature is available in 5.1 audio. As long as your DVD player is set for 6-channel output, the AVR 7000 will automatically sense changes to the bitstream and channel count and reflect them in these indicators.
The letters used by the Speaker/Channel Input Indicators P also flash to indicate when a bitstream has been interrupted. This will happen when a digital input source is selected before the playback starts, or when a digital source such as a DVD is put into a Pause mode. The flashing indicators remind you that the playback has stopped due to the absence of a digital signal and not through any fault of the AVR. This is normal, and the digital playback will resume once the playback is started again.
Night Mode
A special feature of Dolby Digital is the Night mode, which enables AC-3 input sources to be
played back with full digital intelligibilty while reducing the minimum peak level by 1/4 to 1/3. This prevents abruptly loud transitions from dis- turbing others without reducing the impact of the digital source. The Night mode is available only when Dolby Digital signals with special data are being played.
The Night mode may be engaged when a Dolby Digital DVD is playing by pressing the Night Button z on the remote. Next, press the Ú/Û buttons g to select either the middle range or full compression versions of the Night mode. To turn the Night mode off, press the Ú/Û buttons g until the message in the lower third of the video display and the Main Information Display W reads D-Range Off. When the Night mode is active, the Night Mode Indicator N will also illuminate.
The Night mode may also be selected to always be on at either level of compression using the options in the Surround Setup Menu. See page 20 for information on using the menus to set this option.
IMPORTANT NOTES ON
DIGITAL PLAYBACK:
1.When the digital playback source is stopped, or in a pause, fast forward or chapter search mode, the digital audio data will momentarily stop, and the channel position letters inside the Speaker/Channel Indicators P will flash. This is normal and does not indicate a problem with either the AVR 7000 or the source machine. The AVR 7000 will return to digital playback as soon as the data is available and when the machine is in a standard play mode.
2.Although the AVR 7000 will decode virtually all DVD movies, CDs and HDTV sources, it is possible that some future digital sources may not be com- patible with the AVR 7000.
3.Note that not all digitally encoded programs contain full 5.1-channel audio. Consult the pro- gram guide that accompanies the DVD or laser disc to determine which type of audio has been recorded on the disc. The AVR 7000 will auto- matically sense the type of digital surround encoding used and adjust to accommodate it.
4.When a digital source is playing, you may not be able to select some of the analog surround modes such as Dolby Pro Logic, Dolby 3, Stereo, Hall, Theater or Logic 7.
