$Record-Deck Open: Press this button to open the Record Deck %.
%Record Deck: This disc deck is used to record or play back CD, CD-R and CD-RW discs.
^Optical Digital Input: This optical digital input may be used to connect a portable digital audio player to the CDR 26 for digital recording. Remove the dust cap before connecting a cable to this jack. Keep the dust cap in a safe place and replace it when the cable is disconnected in order to prevent the possibility of dust getting into the jack and damaging it.
&Coaxial Digital Input: This coaxial digital input may be used to connect a portable digital audio player to the CDR 26 for digital recording.
*Analog-Record Level Control: The control is used to adjust the input level when making recordings from analog sources such as cassettes, or when CDs are recorded in an analog mode. See page 21 for more information on record levels.
(Record-Deck Stop: Press this button to stop the CD in the Record Deck.
ÓRecord-Deck Play/Select: This button has two functions. It may be pressed when a standard CD is in the Record Deck to put the machine in play, or it may be used to enter a selection or start certain record functions.
ÔRecord-Deck Pause: When the Record Deck is in the Play mode, pressing this button will pause the disc. If the disc has previously been paused, pressing this button will restart the playback.
Record-Deck Program Button: Press this but- ton to begin the programming sequence for the Record Deck. See page 18 for more information on programming playlists on the CDR 26.
ÒRecord-Deck Next: When a disc is playing in the Record Deck %, press and hold this button to play the disc in a fast-forward mode to quickly locate a desired passage. At any time, tapping the button and quickly releasing it will move to the next track on a disc in play.
ÚRecord Deck Previous: This button has two functions. When a disc is playing in the Record Deck %, press and hold this button to play the disc in a fast reverse mode to quickly locate a desired passage. At any time, tapping the button and quickly releasing it will move to the beginning of the current track, and the next press will move to the previous track. When a
disc is stopped, each press will move back one for programming or play when the disc is stopped. Once a track is entered, it may be played by simply pressing the Play Button Ój.
ÛInput Select: Press this button to select the input source (analog or digital) for recording. See page 20 for more information on input selection.
ÙRecord-Deck Time Display Select: Press this button to cycle through the time display options for the Record Deck. See page 17 for more information on the time display.
ıInformation Display: The indicators in the Information Display provide status reports on the oper- ation of the CDR 26. See page 7 for complete expla- nations of each indicator.
ˆRemote Sensor: The IR sensor that receives the commands from the remote control is behind this area. Do not cover or obscure this part of the front panel, to avoid any malfunction with the remote.
˜Play-Deck Time Display Select: Press this but- ton to cycle through the time display options for the Play Deck. See page 17 for more information on the time display.
¯Continuous Play Button: Press this button to place the CDR 26 in Continuous Play mode, which causes it to alternate play between the discs in each deck continuously, so long as the next deck to be played contains a disc and play has not been stopped. To return to the default Single Play mode, in which play stops after the disc in the selected deck has played once, press this button again.
˘Play-Deck Next: When a disc is playing in the Play Deck 3, press and hold this button to play the disc in a fast-forward mode to quickly locate a desired passage. At any time, tapping the button and quickly releasing it will move to the next track on a disc
in play.
¸Play-Deck Previous: This button has two func- tions. When a disc is playing in the Play Deck 3, press and hold this button to play the disc in a fast- reverse mode to quickly locate a desired passage. At any time, tapping the button and quickly releasing it will move to the beginning of the current track, and the next press will move to the previous track. When a disc is stopped, each press will move back one track for programming or play when the disc is stopped. Once a track is entered, it may be played by simply
pressing the Play Button | j. |
˝Play-Deck Program Button: Press this button to begin the programming sequence for the Play Deck. See page 18 for more information on programming playlists on the CDR 26.
Play-Deck Pause: When the Play Deck is run- ning, pressing this button will pause the disc. If the disc has previously been paused, pressing this button will restart the playback.
Play-Deck Play: Press this button to begin play- back of a CD in the Play Deck or the dubbing process.
Play-Deck Stop: Press this button to stop the CD in the Play Deck.
