Signature 2.0

13.The factory presets for most settings are designed to accommodate the typical home-theater system. If the speakers being used are a “satellite/subwoofer” system with compact speakers at the front left/right, center and surround positions, and a subwoofer connected for low- frequency reproduction, no further adjustment is needed. However, if you have larger front, center or surround speakers that are capable of low-frequency reproduction below 100Hz, or if a subwoofer is not installed, you should change the Speaker Setup, as shown on page 24 of this manual.

14.You may change the input source by pressing the front panel Source buttons or any of the Source buttons on the remote. Volume for the 2.0 may be raised or lowered using the front panel Volume knob or the Volume Up/Down buttons on the remote. Finally, to change the surround mode, press Surround buttons on the front panel or the Mono +, Music, Movies or Stereo buttons on the remote.

At this point you are “on the air”! Sit back and enjoy the best in home entertainment.

Operating Hints

The following hints will help you to enjoy the sonic power and operating flexibility of the Signature Series

2.0while you become accustomed to the way it works. Depending on the type of equipment in use in your system, it may, or may not be necessary to follow these hints:

•If you change the Speaker Setup, keep in mind that the changes apply to all modes. You may not change the Speaker Setup for one mode, and not another.

•When the front channel speakers are set to the LARGE mode, the subwoofer output will only be active when a Dolby* Digital source with Low-Frequency Effects (LFE) or DTS are in use. In order to have a full-time output from the subwoofer channel, the front speakers must be set to SMALL. (This is the factory preset configuration.)

•If the Surround Mode indication flashes in the front panel display, that is an indication that the input source is not compatible with the desired mode. The flashing mode is not the one originally selected, rather, it is the

mode automatically selected by the 2.0 to match the input source. For example, when the Pro Logic* mode is selected, but a Dolby Digital source is playing, the

2.0 will automatically select Dolby Digital, but the mode will flash to remind you that while it is correct, it is not the mode originally selected.

•Note that when a DVD is in use, the digital audio out- put is interrupted when the player is in the pause, fast search, slow speed or reverse modes. Since the 2.0 does not receive a digital signal in these cases, it will momentarily try the Pro Logic mode as an alternate. This temporary mode change does not indicate any fault or problem with the 2.0, and the unit will return to the Dolby Digital or DTS Mode shortly after the DVD is put back into a standard play mode.

•If one input source requires a significantly higher volume level than others, or when there is a distinct increase in the noise level or distortion with one input in comparison to others, this is a sign that the input level needs to be adjusted. See pages 29–30 of this manual for instructions on adjusting the input level.

•When certain DVD players are used, it is normal to hear an occasional click or pop noise when the DVD player is put back into play after being paused, or when some DVD discs change chapters. This is a normal side effect of the way in which some DVD players and digital decoders work, and it does NOT indicate a problem with the 2.0 or with your DVD player.

Of course, this is only the tip of the iceberg. Although you have successfully completed a minimal installation we strongly recommend that you take time to read this manual thoroughly. It will show you how to use the many features, modes and controls that are a vital part of the Signature 2.0. Correct setup and installation is impor- tant to optimizing the sound quality of your new con- troller, and will also make it easier to operate. A few minutes spent reading the manual and making certain that your new 2.0 is set up to meet the individual characteristics of your system and listening room will enable the 2.0 to deliver all the performance it is capable of.

Quick Start Instructions

7

Page 10 Page 12
Page 11
Image 11
Harman-Kardon HA160-0004-A manual Operating Hints
Page 10 Page 12

HA160-0004-A specifications

The Harman-Kardon HA160-0004-A is a premium audio amplifier that epitomizes the brand's commitment to high-fidelity sound and innovative technology. This device is designed for audiophiles who demand exceptional performance and a rich listening experience, making it an excellent choice for both home theater systems and high-end audio setups.

One of the standout features of the HA160-0004-A is its power capability. The amplifier delivers an impressive output of 80 watts per channel, ensuring that even the most demanding speakers can perform efficiently without distortion. This power is complemented by a carefully designed Class AB amplification architecture, which combines the benefits of both Class A and Class B designs. The result is a warm, natural sound with a high level of detail across the audio spectrum.

The HA160-0004-A supports a wide range of audio formats and input options, making it versatile for any home audio system. It is equipped with multiple analog inputs, including RCA and balanced XLR inputs, allowing users to connect various audio sources seamlessly. Additionally, it includes digital audio inputs such as optical and coaxial, accommodating modern digital audio playback devices. Users can easily switch between sources using the intuitive front panel or remote control.

Harman-Kardon's commitment to sound quality is further exemplified by the use of high-quality components within the HA160-0004-A. The amplifier features advanced circuitry designed to minimize noise and distortion, which is crucial for preserving the integrity of the audio signal. This results in a clear and dynamic sound, whether listening to music, watching movies, or gaming.

Another noteworthy characteristic of the HA160-0004-A is its sleek, elegant design. The chassis is built with high-quality materials, showcasing a clean aesthetic that will complement any modern audio setup. The front panel features a user-friendly layout with an illuminated display, making it easy to monitor input selections and volume levels.

Additionally, the HA160-0004-A is engineered for durability and longevity, with robust construction that allows it to withstand regular use over time. This amplifier is not only a powerful audio device but also an appealing centerpiece for your entertainment space.

In conclusion, the Harman-Kardon HA160-0004-A amplifier represents a blend of performance, versatility, and style. With its powerful output, advanced technologies, and elegant design, it is well-suited for audiophiles and casual listeners alike, ensuring a superior audio experience across various applications.
Top Page Image Contents