Signature 2.0

Safety Information

Important Safety Information

Verify Line Voltage Before Use

This Signature 2.0 has been designed for use with

120-volt AC current. Connection to a line voltage other than that for which it is intended can create a safety and fire hazard, and may damage the unit.

If you have any questions about the voltage require- ments for your specific model, or about the line voltage in your area, contact your selling dealer before plugging the unit into a wall outlet.

Do Not Use Extension Cords

To avoid safety hazards, use only the power cord attached to your unit. We do not recommend that extension cords be used with this product. As with all electrical devices, do not run power cords under rugs or carpets or place heavy objects on them. Damaged power cords should be replaced immediately with cords meeting factory specifications.

Handle the AC Power Cord Gently

When disconnecting the power cord from an AC outlet, always pull the plug, never pull the cord. If you do not intend to use the unit for any considerable length of time, disconnect the plug from the AC outlet.

Do Not Open The Cabinet

There are no user-serviceable components inside this product. Opening the cabinet may present a shock hazard, and any modification to the product will void your guarantee. If water or any metal object such as a paper clip, wire or a staple accidentally falls inside the unit, disconnect it from the AC power source immediately, and consult an authorized service station.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead

The exclamation point within an

symbol, within an equilateral triangle, is

equilateral triangle is intended to

intended to alert the user to the

alert the user to the presence of

presence of uninsulated “dangerous voltage”

important operating and maintenance

within the product’s enclosure that may be of

(servicing) instructions in the literature

sufficient magnitude to constitute a risk of

accompanying the appliance.

electric shock to persons.

 

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND.

CATV or Antenna Grounding

If an outside antenna or cable system is connected to this product, be certain that it is grounded so as to provide some protection against voltage surges and static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements of the grounding electrode.

NOTE TO CATV SYSTEM INSTALLER:

This reminder is provided to call the CATV (Cable TV) system installer’s attention to article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible.

Installation Location

■To assure proper operation, and to avoid the potential for safety hazards, place the unit on a firm and level surface. When placing the unit on a shelf, be certain that the shelf and any mounting hardware can support the weight of the product.

■Make certain that proper space is provided both above and below the unit for ventilation. If this product will be installed in a cabinet or other enclosed area, make certain that there is sufficient air movement within the cabinet. Under some circumstances a fan may

be required.

■Do not place the unit directly on a carpeted surface.

■Avoid installation in extremely hot or cold locations, or an area that is exposed to direct sunlight or heating equipment.

■Avoid moist or humid locations.

■Do not obstruct the ventilation slots on the top of the unit, or place objects directly over them.

2

Page 5 Page 7
Page 6
Image 6
Harman-Kardon HA160-0004-A manual Important Safety Information
Page 5 Page 7

HA160-0004-A specifications

The Harman-Kardon HA160-0004-A is a premium audio amplifier that epitomizes the brand's commitment to high-fidelity sound and innovative technology. This device is designed for audiophiles who demand exceptional performance and a rich listening experience, making it an excellent choice for both home theater systems and high-end audio setups.

One of the standout features of the HA160-0004-A is its power capability. The amplifier delivers an impressive output of 80 watts per channel, ensuring that even the most demanding speakers can perform efficiently without distortion. This power is complemented by a carefully designed Class AB amplification architecture, which combines the benefits of both Class A and Class B designs. The result is a warm, natural sound with a high level of detail across the audio spectrum.

The HA160-0004-A supports a wide range of audio formats and input options, making it versatile for any home audio system. It is equipped with multiple analog inputs, including RCA and balanced XLR inputs, allowing users to connect various audio sources seamlessly. Additionally, it includes digital audio inputs such as optical and coaxial, accommodating modern digital audio playback devices. Users can easily switch between sources using the intuitive front panel or remote control.

Harman-Kardon's commitment to sound quality is further exemplified by the use of high-quality components within the HA160-0004-A. The amplifier features advanced circuitry designed to minimize noise and distortion, which is crucial for preserving the integrity of the audio signal. This results in a clear and dynamic sound, whether listening to music, watching movies, or gaming.

Another noteworthy characteristic of the HA160-0004-A is its sleek, elegant design. The chassis is built with high-quality materials, showcasing a clean aesthetic that will complement any modern audio setup. The front panel features a user-friendly layout with an illuminated display, making it easy to monitor input selections and volume levels.

Additionally, the HA160-0004-A is engineered for durability and longevity, with robust construction that allows it to withstand regular use over time. This amplifier is not only a powerful audio device but also an appealing centerpiece for your entertainment space.

In conclusion, the Harman-Kardon HA160-0004-A amplifier represents a blend of performance, versatility, and style. With its powerful output, advanced technologies, and elegant design, it is well-suited for audiophiles and casual listeners alike, ensuring a superior audio experience across various applications.
Top Page Image Contents