Signature 2.0

Quick Start Instructions

Quick-Start Instructions

The Signature 2.0 is a powerful, yet easy-to-use product. In order to obtain the maximum benefit from its many features and options, it is strongly recommended that you take the time to carefully read the instructions in the manual. It contains a wealth of information that will help you to safely and properly install and use this product.

We realize, however, that you may be anxious to use your system, so the following steps are provided to out- line the minimum instructions needed to get everything connected and “on the air.” Please follow the directions carefully in order to avoid damage to the Signature 2.0 or other components in your system.

If you choose to take advantage of these Quick-Start instructions we nevertheless urge you to read through the Owner’s Manual at a later time so that your system may be adjusted for optimal performance. That small invest- ment of your time will yield major dividends in the long term in the form of hours of greater listening pleasure.

IMPORTANT NOTE: Before connecting your new Signature 2.0, you will need to physically locate it in your system.

To ensure proper operation, and to prevent possible heat damage, it is important that the 2.0 NOT be placed on top of an amplifier such as the Signature 2.1, or other heat sources. For optimal air circulation, we strongly recommend that the 2.0 be placed on a shelf by itself, with 11/2 to 2 inches of clearance between the top of the 2.0 and any shelf or equipment above it.

Equipment Required for Quick-Start Installation:

✓Signature 2.0 Processor/Tuner and Supplied Accessories

✓Front Left, Center and Right Speakers

✓Left and Right Surround Speakers

✓Five Channels of Audio Power Amplification

✓Powered Subwoofer or Passive Subwoofer and External Amplifier

✓Source Equipment (e.g., VCR, DVD, CD, Satellite Receiver, etc.)

✓Interconnect and Speaker Cables

NOTE: If your equipment does not match the list above you should NOT use the Quick-Start instructions, as additional settings must be made beyond those shown on the next two pages. For complete installation instructions, see page 19.

4

Page 7 Page 9
Page 8
Image 8
Harman-Kardon HA160-0004-A manual Quick-Start Instructions, Equipment Required for Quick-Start Installation
Page 7 Page 9

HA160-0004-A specifications

The Harman-Kardon HA160-0004-A is a premium audio amplifier that epitomizes the brand's commitment to high-fidelity sound and innovative technology. This device is designed for audiophiles who demand exceptional performance and a rich listening experience, making it an excellent choice for both home theater systems and high-end audio setups.

One of the standout features of the HA160-0004-A is its power capability. The amplifier delivers an impressive output of 80 watts per channel, ensuring that even the most demanding speakers can perform efficiently without distortion. This power is complemented by a carefully designed Class AB amplification architecture, which combines the benefits of both Class A and Class B designs. The result is a warm, natural sound with a high level of detail across the audio spectrum.

The HA160-0004-A supports a wide range of audio formats and input options, making it versatile for any home audio system. It is equipped with multiple analog inputs, including RCA and balanced XLR inputs, allowing users to connect various audio sources seamlessly. Additionally, it includes digital audio inputs such as optical and coaxial, accommodating modern digital audio playback devices. Users can easily switch between sources using the intuitive front panel or remote control.

Harman-Kardon's commitment to sound quality is further exemplified by the use of high-quality components within the HA160-0004-A. The amplifier features advanced circuitry designed to minimize noise and distortion, which is crucial for preserving the integrity of the audio signal. This results in a clear and dynamic sound, whether listening to music, watching movies, or gaming.

Another noteworthy characteristic of the HA160-0004-A is its sleek, elegant design. The chassis is built with high-quality materials, showcasing a clean aesthetic that will complement any modern audio setup. The front panel features a user-friendly layout with an illuminated display, making it easy to monitor input selections and volume levels.

Additionally, the HA160-0004-A is engineered for durability and longevity, with robust construction that allows it to withstand regular use over time. This amplifier is not only a powerful audio device but also an appealing centerpiece for your entertainment space.

In conclusion, the Harman-Kardon HA160-0004-A amplifier represents a blend of performance, versatility, and style. With its powerful output, advanced technologies, and elegant design, it is well-suited for audiophiles and casual listeners alike, ensuring a superior audio experience across various applications.
Top Page Image Contents