Automatic Ignition/Operation

3

 

 

...

TheAccentra pelletstove is more thanjust automatic ignition, it is also automatic temperature

 

control. The automatic system will allow the fire size to be adjusted to match the heating

 

needs and even put the fire out if necessary. If heat is needed after the fire is out, the

 

Accentra will automatically re-ignite and adjust the fire size to match the heating need.

 

The totally automatic room sensor mode is recommended because of its efficiency.

 

The unit can be switched between "AUTO" and "MANUAL" at any time during operation.

 

 

Igniter switch to "AUTO"

 

 

Room Temperature Mode

 

 

In "Room Temp Mode" heat output is controlled au-

 

 

tomatically by the Room Sensing Probe. When the Room

 

 

Sensing Probe calls for heat, the stove will increase out-

 

 

put. When the Room Sensing Probe is getting close to

 

 

the set temperature, the stove will begin to level off out-

 

 

put and keep the fire burning at just the right temperature

 

 

to maintain that setting.

 

 

High output is determined by the feed rate set-

 

 

ting. This setting, generally on #4, can be increased if

 

 

higher burn rates are necessary (Fig. 1). The unit's maxi-

Fig. 1

 

mum burn rate should not create less then 1" of ash on

 

the burn pot front edge(See Fig.4). Overfeeding is not a

Room Temperature Mode: This

setting will produce a room

temperature of 70 degrees with the distribution blower at medium

safety concern, but fuel may be wasted if unburned pel-

speed.

 

lets fall into the ash pan.

 

 

In "Room Temp Mode" a constant fuel consumption

Stove Temperature Mode

rate is sacrificed for exact room temperature. Therefore,

as it gets colder more pellets will be burned automati-

 

 

 

 

cally.

 

 

The distribution blower speed will vary according to

 

 

the position of the mode selector pointer, and fire size.

 

 

Ignitor switch to "AUTO"

 

 

Stove Temperature Mode

 

 

This allows for automatic ignition upon start-up only.

 

 

The unit can then be set at any desired setting. The heat

 

 

output and fuel consumption will remain constant regard-

 

 

less of room temperature (See Fig 2). The unit's maxi-

 

 

mum feed rate should not create less than 1" of ash on

This setting will produce medium heat with the

the burn pot front edge. See Fig 4.

The unit's low burn or maintenance setting is as low

distribution blower on "low".

 

 

 

as it will go. It will not go out unless it runs out of fuel or is

 

 

turned off.

 

 

Shut-Down Procedure

 

 

To kill the fire or stopburning the stove, turn the Mode

 

 

Selector to "OFF". This will cause the fire to diminish and

 

 

burn out. When the fire burns out and the stove cools

 

 

down everything will stop.

 

 

If you pull the plug to shut down the stove, all motors

 

 

will stop. This may cause incomplete combustion and

 

 

smoke in the firebox. If the load door is opened the smoke

 

 

may escape.

This setting will produce continuous maximum heat

The best way to shut down the stove is simply let it

run out of pellets, then the stove will shut down automati-

output with the distribution blower at full speed.

cally.

 

 

Fig. 2

Page 2 Page 4
Page 3
Image 3
Harman Stove Company 2 manual Automatic Ignition/Operation, Stove Temperature Mode
Page 2 Page 4

2 specifications

Harman Stove Company 2 has earned a reputation as a leader in the hearth products industry, particularly known for its innovative approach to pellet stoves and inserts. Established with a commitment to quality and efficiency, Harman focuses on creating products that elevate comfort while being environmentally sustainable.

One of the standout features of Harman Stove Company 2 is its advanced heating technology. Their pellet stoves utilize a unique feed system that ensures consistent fuel delivery, which translates to reliable, even heat output. The integrated Smart Control technology allows users to easily adjust settings remotely, providing the convenience of controlling the stove from their smartphones.

Notably, Harman stoves come equipped with the exclusive Heat Management System (HMS), which helps to distribute warmth throughout the home effectively while optimizing fuel consumption. This system includes adjustable air intake and exhaust options that enhance efficiency, ensuring that less fuel is wasted and more heat is produced.

Durability is another hallmark of Harman's products. Each stove is constructed with high-quality materials, including rugged cast iron and heavy-gauge steel, designed to withstand the test of time while providing excellent heat retention. The company takes pride in its craftsmanship, offering stoves that not only perform exceptionally well but also boast a stylish appearance.

In terms of efficiency, Harman Stove Company 2 focuses on creating products with high efficiency ratings and low emissions. Many of its models are certified by the Environmental Protection Agency (EPA), showcasing their commitment to reducing the environmental impact. Harman's engineering innovations minimize particulate emissions, ensuring that customers can enjoy the warmth of their stove while being environmentally conscious.

Safety is also paramount; Harman stoves come with features such as automatic shutoff systems and heat-resistant glass, providing peace of mind for users. The company's dedication to safety is evident in its rigorous testing processes that ensure every product meets high safety standards.

Overall, Harman Stove Company 2 has successfully combined advanced technology, durable construction, and a focus on environmental stewardship to produce a line of heating solutions that cater to modern consumer needs. Offering reliability, efficiency, and style, Harman continues to be a trusted name in the industry, providing warmth and comfort in homes across the nation.
Top Page Image Contents