Good, Pilot does not stay lit Bad | Harman Stove Company XL specification

32Trouble Shooting

Check inlet pressure

Good

Check size of pilot ﬂames

Good

Check Milivolt output of thermocouple. Should be 10 or more MV.

Good

Replace Valve

Pilot does not stay lit

Bad	Correct inlet pressure

Bad		Adjust pilot adjustment to
		achieve proper ﬂame.

Bad	Replace Thermocouple

Image 32

Harman Stove Company XL owner manual Good, Pilot does not stay lit Bad

Contents

ShadowLight XL Direct Vent Gas Fireplace Insert Advetissement Quinconque ne respect pas Table of Contents Introduction Speciﬁcations Speciﬁcations Ratings Natural Propane Operation Door Handles Operation HOW to Turn OFF the Fire Packing List Inside the Insert Box Inside Face Box Installation Making The Connection Gas Pressure RequirementsNatural Gas LP Gas Converting to Natural Gas These kits are only for use ShadowLight XL Insert Burner Pilot Installation Converting to High Altitude Venting Use Only Approved Venting Chimney Cap Components Flashing Venting and Installation Flue Installation Installation Check List Connecting Optional Thermostat Remote Control Cleaning the Glass Cleaning the Log Set and FireboxReplacing the Glass and Gasket Removing the Glass Door Cleaning the Burners Replacing The Blower Wiring Diagrams Shadowlight XL Parts Burner Module Parts Manifold Pressure Natural Gas Inches Inlet Pressure To 7 inchesPropane Manifold Pressure Inches Inlet Pressure To 13 inches Yes BadYes Bad Good Pilot does not stay lit Bad Main Burner will not light with valve in on position Light pilot Harman Gold Warranty