Hasbro 75052 manual To Replace Lamp Bulb

TO REPLACE LAMP BULB

As the projector operates over time, the brightness of the projector lamp gradually decreases and the lamp becomes more susceptible to breakage. You can install a new lamp at any time to bring the projector up to factory-fresh brightness.

The lamp bulb has approximately a 1000-hour life. The lamp operates at a very high temperature, so wait 30 minutes before removing the lamp bulb. Use a 35 Watt 12V MR-11 lamp bulb, found where standard light bulbs are sold in home improvement and hardware stores.

1.Turn off

ZOOMBOX and allow it to cool for 30 minutes.

2.Unplug the power cord.

3.Use a Phillips/cross head screwdriver (not included) to unscrew the cover and remove.

4.Use a Phillips/cross head screwdriver (not included) to unscrew the inside panel. Panel stays attached.

5.Remove existing bulb. Use a soft cloth to prevent breakage.

6.Plug in replacement bulb.

7.Reattach panel.

8.Reattach cover.

14