Hawking Technology HWR54G manual Disconnect, Clear Log, Refresh, Message, Description

Wireless Router User Guide

Disconnect	If connected to your ISP, hang up the connection.
Clear Log	Delete all data currently in the Log. This will make it easier to
	read new messages.
Refresh	Update the data on screen.

Connection Log Messages

Message	Description
Connect on Demand	Connection attempt has been triggered by the "Connect
	automatically, as required" setting.
Manual connection	Connection attempt started by the "Connect" button.
Reset physical connection	Preparing line for connection attempt.
Connecting to remote	Attempting to connect to the ISP's server.
server
Remote Server located	ISP's Server has responded to connection attempt.
Start PPP	Attempting to login to ISP's Server and establish a PPP
	connection.
PPP up successfully	Able to login to ISP's Server and establish a PPP connection.
Idle time-out reached	The connection has been idle for the time period specified in
	the "Idle Time-out" field. The connection will now be
	terminated.
Disconnecting	The current connection is being terminated, due to either the
	"Idle Time-out" above, or "Disconnect" button being clicked.
Error: Remote Server not	ISP's Server did not respond. This could be a Server problem,
found	or a problem with the link to the Server.
Error: PPP Connection	Unable to establish a PPP connection with the ISP's Server.
failed	This could be a login problem (name or password) or a Server
	problem.
Error: Connection to	The existing connection has been lost. This could be caused
Server lost	by a power failure, a link failure, or Server failure.
Error: Invalid or unknown	The data received from the ISP's Server could not be
packet type	processed. This could be caused by data corruption (from a
	bad link), or the Server using a protocol which is not
	supported by this device.

38