Setup
WEP Screen
This screen is accessed by clicking the "Configure WEP" button on the Wireless screen.
| Figure 7: WEP Screen |
Data - WEP Screen | |
|
|
WEP Data | Select the option to match other Wireless Stations: |
Encryption | • Disabled - data is NOT encrypted before being transmitted. |
| |
| • 64 Bit - data is encrypted, using the default key, before being |
| transmitted. You must enter at least the default key. For 64 Bit |
| Encryption, the key size is 5 chars (ASCII) or 10 chars in HEX |
| • 128 Bit - data is encrypted, using the default key, before being |
| transmitted. You must enter at least the default key. For 128 Bit |
| Encryption, the key size is 13 chars (ASCII) or 26 chars in HEX |
| Note: Hex chars are 0~9 and A~F. |
|
|
Authentication | Normally, this should be left at the default value of "Automatic". If |
Type | changed to "Open System" or "Shared Key", ensure that your Wireless |
| Stations use the same setting. |
|
|
Key Input | Select "Hex" or "ASCII" depending on your input method. (All keys |
| are converted to Hex, ASCII input is only for convenience.) |
|
|
Default Key | Select the key you wish to be the default. Transmitted data is |
| ALWAYS encrypted using the Default Key; the other Keys are for |
| decryption only. |
| You must enter a Key Value for the Default Key. Other stations must |
| have the same key. |
|
|
Key Value | Enter the key value or values you wish to use. The Default Key is |
| required, the others are optional. |
|
|
Passphrase | If desired, you can generate a key from a phrase, instead of entering |
| the key value directly. Enter the desired phrase, and click the |
| "Generate Keys" button. |
|
|
19
