Hawking Technology HWR54G Options, Mode, Channel No, Broadcast SSID, WEP data, encryption, Point

Wireless Router User Guide

Options

Mode	Select the desired mode:
	• g & b - Both 802.11.g and 802.11b Wireless stations will be able
	to use the Wireless Router.
	• g only - Only 802.11g Wireless stations can use the Wireless
	Router.
	• b only - Only 802.11b connections are available. 802.11g
	Wireless Stations will only be able to use the Wireless Router if
	they are fully backward-compatible with the 802.11b standard.
Channel No.	This selection determines which operating frequency will be used. The
	channel list changes according to the selected region.
	Select the desired channel. Adjacent Access Points should use different
	channels to avoid interference.
Broadcast SSID	If Enabled, the SSID will broadcast its name to all Wireless Stations.
	Stations which have no SSID (or a "null" value) can then adopt the
	correct SSID for connections to this Access Point.
WEP data	• WEP status - This will display "Enabled" or "Disabled"
encryption	• Configure WEP - Click this button to access the WEP sub-
	screen, and the WEP settings. Show the WEP status.
Access Point
Enable Access	• If Enabled, wireless stations will be able to locate and use this
Point	Access Point.
	• If Disabled, the wireless interface is disabled, and will neither
	transmit nor receive wireless traffic.
	• The Wireless (WLAN) LED on the front panel will remain OFF if
	the Wireless interface is disabled.
Allow LAN	• All Wireless Stations - All wireless stations can use the access
access by …	point to access your LAN.
	• Selected Wireless stations only - Only selected wireless stations
	access your LAN. To select the required wireless stations, click
	the "Select Stations" button.
Allow Internet	• All Wireless Stations - All wireless stations can use the access
access by …	point to access the Internet.
	• Selected Wireless stations only - Only selected wireless stations
	use the access point to access the Internet. To select the required
	wireless stations, click the "Select Stations" button.
Buttons
Configure WEP	Click this button to view the WEP sub-screen.
Select Stations	Click this button to select the required PCs.
Save	Save the data on screen.
Cancel	The "Cancel" button will discard any data you have entered since the
	last "Save" operation.

18