Hawking Technology HWR54G Defining your own Virtual Servers, Internal Port No, External Port No

Models: HWR54G

1 94
Download 94 pages 36.13 Kb
Page 65
Image 65
Internal Port No.

 

 

 

 

 

 

 

 

 

 

 

 

Advanced Features

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Internal Port No.

Enter the port number which the Server software is configured to

 

 

 

 

 

 

 

 

 

 

 

use.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

External Port No.

The port number used by Internet users when connecting to the

 

 

 

 

 

 

 

 

 

 

 

Server. This is normally the same as the Internal Port Number. If it

 

 

 

 

 

 

 

 

 

 

 

is different, this device will perform a "mapping" or "translation"

 

 

 

 

 

 

 

 

 

 

 

function, allowing the server to use one port address, while clients

 

 

 

 

 

 

 

 

 

 

 

use a different port address.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Buttons

 

 

 

Defaults

This will delete any Servers you have defined, and set the pre-

 

 

 

 

 

 

 

 

 

 

 

defined Servers to use their default port numbers.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Disable All

This will cause the "Enable" setting of all Virtual Servers to be set

 

 

 

 

 

 

 

 

 

 

 

OFF.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Update Selected

Update the current Virtual Server entry, using the data shown in the

Server

"Properties" area on screen.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Add as new Server

Add a new entry to the Virtual Server list, using the data shown in

 

 

 

 

 

 

 

 

 

 

 

the "Properties" area on screen. The entry selected in the list is

 

 

 

 

 

 

 

 

 

 

 

ignored, and has no effect.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Delete

Delete the current Virtual Server entry. Note that the pre-defined

 

 

 

 

 

 

 

 

 

 

 

Servers can not be deleted. Only Servers you have defined yourself

 

 

 

 

 

 

 

 

 

 

 

can be deleted.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clear Form

Clear all data from the "Properties" area, ready for input of a new

 

 

 

 

 

 

 

 

 

 

 

Virtual Server entry.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

For each entry, the PC must be running the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

appropriate Server software.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Defining your own Virtual Servers

If the type of Server you wish to use is not listed on the Virtual Servers screen, you can define and manage your own Servers:

Create a new Server:

1.

Click "Clear Form"

 

2.

Enter the required data, as described above.

 

3.

Click "Add".

 

4.

The new Server will now appear in the list.

Modify (Edit) a Server: 1. Select the desired Server from the list

2.Make any desired changes (for example, change the Enable/Disable setting).

3.Click "Update" to save changes to the selected Server.

Delete a Server: 1. Select the entry from the list.

2.Click "Delete".

Note: You can only delete Servers you have defined. Pre- defined Server cannot be deleted.

59

Page 65
Image 65
Hawking Technology HWR54G Defining your own Virtual Servers, Internal Port No, External Port No, Buttons, Defaults, Delete