How To Order Replacement Parts
Use only manufacturer’s authorised or approved replacement parts. The letter placed on the end of the part number denotes the type of finish for the part, C for chrome, Z for zinc, a PA for purchased assembly. It is important that you include this when ordering a part. Do not use attachments or accessories not specifically recommended for this unit. In order to obtain proper replacement parts you must supply the model number of your machine (see serial number).
Replacement parts, except for the engine, transmission, transaxle or differential, are available from your local Hayter authorised dealer, the store where the mower was purchased or a service shop recommended by the store.
If you are unable to obtain parts or service in the manner outlined above, then contact:
HAYTER LIMITED,
Service Department,
Spellbrook,
Bishop’s Stortford,
Hertfordshire. CM23 4BU
When ordering the following information is required:
(1)The Model Number
(2)Serial Number
(3)Part Number
(4)Quantity
| 28 |
