ASSEMBLY | ||
ENGINE PREPARATION | Fill Crankcase With Oil | |
Note: Engine does not contain OIL or | 1. Remove the oil fill cap/dipstick shown in | |
Figure 4. Fill the crankcase to the FULL | ||
PETROL. | ||
line on oil fill cap/dipstick. DO NOT OVER- | ||
| ||
WARNING: Follow the engine | FILL. | |
2. Install the oil fill cap/dipstick and tighten | ||
manufacturer’s instructions for | ||
securely. | ||
the type of petrol and oil to use. | ||
Always use a safety petrol container. Do |
| |
not smoke when adding petrol to the en- | Fill Fuel Tank With Petrol | |
gine. When inside an enclosure, do not | See the engine manufacturer’s instructions for | |
fill with petrol. Before you add petrol, | ||
the type of petrol to use. | ||
stop the engine. Let the engine cool for | ||
| ||
several minutes. | Fuel Cap | |
| ||
See the engine manufacturer’s instructions | Oil Fill | |
for the type of petrol and oil to use. Before | Cap/Dipstick | |
| ||
you use the unit, read the information on |
| |
safety, operation, maintenance, and storage. |
| |
Note: Actual sustained horsepower will |
| |
likely be lower due to operating limita- |
| |
tions and environmental factors. | Figure 4 | |
| ||
nCHECKLIST
For the best performance and satisfaction from this quality product, please review the fol- lowing checklist before you operate the ma- chine:
nAll assembly instructions have been completed.
nCheck carton. Make sure no loose parts remain in the carton.
As you learn how to use the machine, pay ex- tra attention to the following important items:
nnEngine oil is at correct level.
nnFuel tank is filled with fresh, clean, reg- ular unleaded petrol.
nnBecome familiar and understand the function of all controls. Before your start the engine, operate all controls.
10 |
