Manuals / Brands / Lawn and Garden / Lawn Mower / Hayter Mowers / Lawn and Garden / Lawn Mower

Hayter Mowers 510D 1.17 1.17 Power Unit Specications, SPECIFICATIONS, Operator Controls, Weight and Dimensions

1 52

Download 52 pages, 1.4 Mb

1.17 1.17

Power Unit Speciﬁcations

Ground Speed: 0 - 9 km/hr (0 - 5.6 mph) forward

0 - 5 km/hr (0 - 3 mph) reverse

Tyres Tyre Type Recommended max.

tyre pressures

Standard 16 x 6.5 - 8 4 Ply 1.9 bar (28 psi)

Option 16 x 4.00 x 8 4 ply 2.2 bar (32 psi)

Parking Brake: Lever operated integral transaxle disc brake

Safety Features: Neutral start interlock

Operator presence control

Braked cutterhead drive (rotary attachment)

Operator Controls

Cutterhead drive: Hand operated lever to engage

(Maintain by twin hand-operator pressure control levers)

Engine Speed: Hand operated lever

Parking Brake: Hand operated lever with engagement lock

Forward and Reverse: Forward and reverse twin hand operator hand/thumb levers

Ignition: On/Off switch

Bypass Valve: Hand operated lever

Weight and Dimensions

30” Rotary attachment ﬁtted 30” Verge attachment ﬁtted

Maximum Working Width: 844 mm 902 mm

Maximum Mowing Width: 762 mm 762 mm

Maximum Overall Length: 2040 mm 1680 mm

Overall Height: 1160 mm 1160 mm

Approx. Working Weight: 195 kg

135 kg (Power unit only)

218 kg (5 blade)

135 kg (Power unit only)

SPECIFICATIONS

Contents

Main CONDOR HYDROSTATIC DRIVE Operators Manual Page Page Page 1.5 1.5 CONTENTS CONTENTS Page No. 1.6 1.6 CONTENTS CONTENTS Page No. Training Preparation 1.8 1.8 Preparation Continued Operation 1.9 1.9 Operation Continued Page 1.11 1.11 Decals A B C D E H F G Page 1.13 1.13 dB EC CONFORMITY INFORMATION Noise Levels Vibration Levels EC Declaration of Conformity Wear Hearing Protection EC DECLARATION OF CONFORMITY Serial No. 1.15 1.15 INTRODUCTION Introduction Page 1.17 1.17 Power Unit Specications SPECIFICATIONS Operator Controls Weight and Dimensions 1.18 1.18 Recommended Lubricants and Hydraulic Fluids SPECIFICATIONS Verge Attachments Rotary Attachments Page 1.20 1.20 Assembling the Cutterhead Attachment to the Power Unit ASSEMBLING THE MOWER Fig 2 Fig 1 1. Nut 2. Tensioning Bolt 3. Mounting Bolt 4. Washer 5. Nyloc Nut 1.21 1.21 Assembling the Cutterhead Attachment to the Power Unit continued ASSEMBLING THE MOWER 1.22 1.22 Safety Notice Operator Presence Control 1.23 1.23 Identication of Controls P Braking System Throttle Control Travel 1.24 1.24 Travel continued Transmission Bypass Valve Control 1.25 1.25 Ignition Switch Cutterhead Drive Operation Starting the Engine 1.26 1.26 Starting the Engine continued Stopping the Engine 1.27 1.27 General Operating Hints Adjusting Height of Cutter Page Page 1.30 1.30 Engine Running In Period - At First 50 Hours of Use 1.31 1.31 Running In Period - At First 50 Hours of Use continued Daily and Before Use 1.32 1.32 Daily and Before Use continued 1.33 1.33 Daily And Before Use continued 1.34 1.34 Every 50 Hours Lubrication 1.35 1.35 Every 200 Hours 1.36 1.36 Every 200 Hours continued 1.37 1.37 Every 200 Hours continued 1.38 1.38 Power Unit General Maintenance continued 1.39 1.39 Power Unit General Maintenance continued Verge Attachment 1.40 1.40 Verge Attachment continued 1.41 1.41 Verge Attachment continued Rotary Attachment 1.42 1.42 Rotary Attachment continued Cutterblades 1.43 1.43 PREPARING THE MOWER FOR STORAGE Preparing the Mower for storage 1.44 1.44 GRASS CUTTING FAULTS Rotary Attachment Verge Attachments 1.45 1.45 TROUBLE SHOOTING 1.46 1.46 TROUBLE SHOOTING 1.47 1.47 ELECTRICAL CIRCUIT DIAGRAM Black 1.48 1.48 WARRANTY