HOW TO USE A CLASSIC WORKOUT | |
1. Insert the key into the console. | |
See HOW TO TURN ON THE POWER on page | |
13. |
|
2. Select a classic workout. |
|
To select a classic workout, press one of the | |
Classic Workouts buttons repeatedly until the | |
name of the desired workout appears in the matrix. | |
When a classic workout is selected, the Incline dis- | |
play will show the maximum incline setting of the | |
workout and the Speed display will show the maxi- | |
mum speed setting. The Time display will show | |
how long the workout will last. After a few seconds, | |
the matrix will show the profile of the workout. | |
3. Start the walking belt. |
|
Press the Start button or Speed increase button to | |
start the workout. A moment after you press the | |
button, the treadmill will automatically adjust to the | |
first speed and incline settings of the workout. Hold | |
the handrails and begin walking. | |
Each workout is divided into | |
One speed setting and one incline setting are pro- | |
grammed for each segment. Note: The same | |
speed setting and/or incline setting may be pro- | |
grammed for consecutive segments. | |
During the workout, the | Current Segment |
profile will show your | |
progress. The flashing |
|
segment of the profile |
|
represents the current |
|
segment of the workout. |
|
The height of the flash- |
|
ing segment indicates the speed setting for the cur- | |
rent segment. At the end of each segment, a series of tones will sound and the next segment of the pro- file will begin to flash. If a different speed or incline setting is programmed for the next segment, the speed or incline setting will flash in the display to alert you.
The workout will continue in this way until the last segment of the profile flashes in the display and the last segment ends. The walking belt will then slow to a stop.
If the speed or incline setting is too high or too low at any time during the workout, you can manually override the setting by pressing the speed or incline buttons. Note: When the next segment of the workout begins, the treadmill will automatically adjust to the speed and incline settings for the next segment.
To stop the workout at any time, press the Stop button. To restart the workout, press the Start but- ton or the Speed increase button. The walking belt will begin to move at 1 mph. When the next seg- ment of the workout begins, the treadmill will auto- matically adjust to the speed and incline settings for the next segment.
4. Follow your progress with the matrix and the displays.
See step 5 on pages 14 and 15.
5. Measure your heart rate if desired. See step 6 on page 15.
6. When you are finished exercising, remove the key from the console.
See step 7 on page 15.
16
