Healthrider HMTL79608.0 manual HOW to USE a Custom Workout

HOW TO USE A CUSTOM WORKOUT
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page
13.
2. Select one of the custom workouts.
To select a custom workout, press the Create Your
Own button until the name of the desired workout
appears in the matrix.
When a custom workout is selected, the Incline
display will show the maximum incline setting of
the workout and the Speed display will show the
maximum speed setting. The Time display will
show how long the workout will last.
The matrix will show
the first speed settings
of the workout. Note: If
only three columns of
indicators appear in
the matrix, see HOW
TO CREATE A CUSTOM WORKOUT on page
18.
3. Start the walking belt.
Press the Start button or the Speed increase button
to start the workout. A moment after you press the
button, the treadmill will automatically adjust to the
first speed and incline settings of the workout. Hold
the handrails and begin walking.
Each custom workout is divided into one-minute
segments. One speed setting and one incline set-
ting are programmed for each segment. (The same
speed setting and/or incline setting may be pro-
grammed for consecutive segments.)
During the workout, the	Current Segment
profile will show your
progress. The flashing
segment of the profile
represents the current
segment of the workout.
The height of the flash-
ing segment indicates the speed setting for the cur-

rent segment. At the end of each segment, a series of tones will sound and the next segment of the pro- file will begin to flash. If a different speed or incline setting is programmed for the next segment, the speed or incline setting will flash in the display to alert you.

The workout will continue in this way until the last segment of the profile flashes in the display and the last segment ends. The walking belt will then slow to a stop.

If desired, you can redefine the workout while using it. To change the speed or incline setting for the current segment, simply press the Speed or Incline increase and decrease buttons. When the current segment ends, the new setting will be saved in memory. To increase the length of the workout, first wait until the workout is completed. Then, press the Start button and program speed and incline set- tings for as many additional segments as desired. When you have added as many segments as de- sired, press the Stop button twice. To decrease the length of the workout, press the Stop button twice at any time before the workout is completed.

To stop the workout at any time, press the Stop button. The Time display will begin to flash. To restart the workout, press the Start button or the Speed increase button. After a moment, the walk- ing belt will begin to move at 1 mph. When the next segment of the workout begins, the treadmill will au- tomatically adjust to the speed and incline settings for the next segment.

4. Follow your progress with the matrix and the displays.

See step 5 on pages 14 and 15.

5. Measure your heart rate if desired. See step 6 on page 15.

6. When you are finished exercising, remove the key from the console.

See step 7 on page 15.

19