R
CLEARANCES TO COMBUSTIBLES
United States and Canada
| Maximum Mantel Depth - 10" (254mm) | ||
|
| Mantel |
|
SideWall | B | Fascia or Trim | |
| C |
| |
| A |
| |
| Insert | D | |
|
| ||
|
|
| |
| F | E |
|
Hearth Extension
Omni Report
|
| USA | CANADA |
A | Sidewall to Stove | 15" (381mm) | 15" (381mm) |
B | Mantel to Stove | 26" (660mm) | 23" (584mm) |
C | Top Trim to Stove | 20" (508mm) | 20" (508mm) |
D | Side Trim to Stove | 6" (152mm) | 6" (152mm) |
E Hearth Extension from Glass | 16" (406mm) | 18" (457mm) | |
F | Hearth Extension from Side of Insert | 8" (203mm) | 8" (203mm) |
Thermal protection USA & Canada Thermal protection must be 1/2 Inch (12.7mm) minimum
thickness ('k" value = 0.84) or equivalent material*
*Zero Clearance Installations USA Only
*See Alternative Floor Protection Worksheet on page 7.
In Canada a full length six inch (152mm) S635 flue liner required as per ULC S628.
NOTE: When installing into a masonry fireplace, the fire- place must be built to UBC Chapter 37 standards. Do not remove brick or mortar from masonry fireplace to accom- modate insert. The permanent metal warning plate provided must be attached to the back of the fireplace stating the fire- place may have been altered to accommodate the insert and must be returned to original condition for use as a conven- tional fireplace.
September 1, 2008 | Page |
