Hearth and Home Technologies 5100I-NL-B, 5100I-GD-B Firebrick Replacement, Nbr Brick Size Qty

5100-I ACT WOOD INSERT

R

E. Firebrick Replacement

•Frequency: As needed

•By: Homeowner / Qualified service technician

•Task: See the following instructions.

The firebox is lined with high quality firebrick, which has exceptional insulating properties. There is no need to use a grate; simply build a fire on the firebox floor. Do not operate appliance without firebrick.

1.Be certain coals are completely cold. Remove all old brick and ash from unit and vacuum out firebox.

2.Remove new brick set from box and lay out to diagram as shown.

3.Lay bottom bricks in unit.

4.Install rear bricks on the top of the bottom bricks. Slide top of bricks under clip on back of firebox wall and push bottom of brick back.

5.Install side bricks. Slide top of brick under clips on side of firebox and push the bottom of the brick until it is flush with the side of the unit.

NOTE: Do not operate unit with any firebrick missing. It will void the warranty.

Nbr	Brick Size	Qty
1	9 x 4-1/2 x 1-1/4”	14
2*	9 x 4-1/2 x 1/1/4” with hole	2
3	9 x 3 x 1-1/4”	2
4	8-1/2 x 1-3/4 x 1-1/4”	2
5	3 x 1-3/4 x 1-1/4”	1
6	9 x 2 x 1-1/4”	2
7	see drawing, Figure 31.2	2
8	see drawing, Figure 31.2	2
9	see drawing, Figure 31.2	2
10	7-1/2 x 3-1/2 x 1-1/4”	2
11	9 x 2-1/4 x 1-1/4”	1
12	8-3/4” X 2-1/4” X 1-1/4”	2

Use Part 832-0550 when ordering individual brick. Provide brick dimension or copy this page, mark the desired brick and take it to your authorized dealer.

*Use Part SRV436-0380 when ordering the 2 bricks with holes.

	6	5
						6
	1
		2	11
1	1			2	1	1
						1
10	9	1		1	9
						10
		1	4	1
	7
		1		1	7
	1
8		4		1
12	3					8
			3
					12

Figure 31.1

6-3/4”	9	7-1/2”
	4-1/2”		4-1/2”
			5/8”
		8-1/2”	3/4”
	8		7
	81o
4-7/8”			3-3/8”
		2-7/8”	3-3/4”

Figure 31.2

September 1, 2008 438-0380D Page 31