Hearth and Home Technologies 6000GL-IPILP-S, 6000GL-IPILP-R owner manual Junction Box Installation

Models: 6000GL-IPILP-S 6000GL-IPI-R 6000GL-IPILP-R 6000GL-IPI-S

1 70
Download 70 pages 7.31 Kb
Page 49
Image 49

E. Junction Box Installation

If the box is being wired from the INSIDE of the appliance:

Remove the screw attaching the junction box/receptacle to the outer shell, rotate the junction box inward to disengage it from the outer shell (see Figure 12.4).

Pull the electrical wires from outside the appliance through the opening into the valve compartment and secure wires with a Romex connector. See Figure 12.4.

Make all necessary wire connections to the junction box/ receptacle and reattach the junction box/receptacle to the outer shell.

 

Romex

 

Connector

 

14/2WG

 

Cover Plate

 

outside firebox

WHT

 

BLK

 

WHT

 

BLK

Copper

 

GRN wire

ground attached

to GRN screw with

inside box

 

GRN wire

NOTICE: DO NOT wire

110 VAC to wall switch.

Figure 12.4 Junction Box Detail

 

F. Wall Switch Installation for Fan (Optional)

 

 

 

 

If the box is being wired to a wall mounted switch for use

 

 

 

 

with a fan (See Figure 12.5):

 

Minimum 14-3 AWG

 

Switch

The power supply for the appliance must be brought into

 

 

 

 

with Ground

 

 

 

a switch box.

 

 

Red

 

 

 

 

Black

Black

 

 

 

 

White

White

The power can then be supplied from the switch box to the

 

Junction Box

Green

Green

 

 

 

 

 

appliance using a minimum of 14-3 with ground wire.

 

Red Black White Green

 

 

At the switch box connect the black (hot) wire and red

 

 

Power

 

 

Switch Box

 

 

Supply

 

(switch leg) wire to the wall switch as shown.

 

 

 

 

 

 

 

Wires

At the appliance connect the black (hot), white (neutral)

 

 

Knockout

 

 

and green (ground) wires to the junction box as shown.

 

 

 

 

• Add a 1/4 in. insulated female connector to the red (switch

 

Red

 

 

 

 

 

 

 

leg) wire, route it through the knockout in the face of the

 

 

 

 

 

junction box, and connect to the top fan switch connector

Figure 12.5 Junction Box Wired to Wall Switch or BC10

 

(1/4 in. male) as shown.

 

Heat & Glo • 6000GL-IPI-R, 6000GL-IPI-S

2102-900 Rev. O • 12/08

49

Page 49
Image 49
Hearth and Home Technologies 6000GL-IPILP-S Junction Box Installation, Wall Switch Installation for Fan Optional

6000GL-IPILP-S, 6000GL-IPI-R, 6000GL-IPILP-R, 6000GL-IPI-S specifications

Hearth and Home Technologies has consistently set the benchmark for innovation and efficiency in the realm of gas fireplaces. Among their notable offerings, the models 6000GL-IPI-S, 6000GL-IPILP-R, 6000GL-IPI-R, and 6000GL-IPILP-S stand out for their superior design and advanced technologies. These models cater to diverse homeowner needs, combining aesthetic appeal with functionality.

A defining feature of the 6000GL series is the advanced IntelliFireā„¢ Ignition System. This patented technology ensures a safe and efficient startup and operation, minimizing energy consumption while maximizing user convenience. With this system, users can enjoy a worry-free experience, as the ignition system is designed to only operate when needed.

Another significant characteristic of these models is their customizable options. Homeowners can choose linear and modern designs, along with various media options, including glass and stone, to create a personalized look that complements their space. The ability to customize not only enhances the beauty of the fireplaces but also allows for harmonious integration into various interior designs.

The 6000GL-IPI-S and 6000GL-IPILP-S models focus on direct vent technology, allowing for safe venting of exhaust gases without compromising indoor air quality. This is particularly beneficial in modern homes with tight construction. The models require minimal clearance, making them ideal for both new constructions and remodels.

For those who wish to enjoy a more traditional style, the 6000GL-IPI-R and 6000GL-IPILP-R models present a refined aesthetic, boasting classic fireplace elements that enhance any living space. These options engage viewers with a captivating flame pattern, producing realistic flickering flames that create an inviting atmosphere.

Moreover, Hearth and Home Technologies have incorporated energy-efficient features in these models. The fans operate quietly and efficiently, distributing heat more evenly throughout the room, thus ensuring a comfortable environment without the usual noise disturbances associated with traditional heating methods.

In summary, the Hearth and Home Technologies 6000GL-IPI-S, 6000GL-IPILP-R, 6000GL-IPI-R, and 6000GL-IPILP-S models exemplify the perfect blend of cutting-edge technology and timeless beauty. With customizable aesthetics, advanced ignition systems, direct vent capabilities, and energy-efficient performance, these fireplaces not only enhance home ambiance but also provide reliable heating solutions. Whether it's a modern or traditional setting, these models are sure to impress homeowners while delivering quality and comfort.