4.Then press the MODE button on the transmitter to change the system to ON. The spark electrode should begin sparking to ignite the pilot. After the pilot is lit, the main gas valve should open and the main gas flame should ignite.

5.Press the MODE button on the transmitter to OFF. The main gas flame and pilot flame should BOTH extinguish.

6.Press the MODE button on the transmitter to change the system to THERMO.

7.Advance the SET temperature on the transmitter to tem- perature of at least 20 F (10 C) above the room tempera- ture displayed on the LCD screen and the system flame will ignite.

8.Set the SET temperature to at least 20 F (10 C) below the room temperature and the system will extinguish. There- after, it should continue to cycle on and off thermostati- cally approximately every two minutes as the ROOM tem- perature changes, but only when the temperature differ- ential between ROOM and SET temperatures differ at least 20 F (10 C). The 20 F differential is the factory setting.

Timer Operation

The countdown timer will operate in either the manual ON or THERMO mode. Once the fireplace system is in an operat- ing mode, set the countdown timer to turn off in 15 minutes. The timer function will allow operation to continue until the “countdown time” on the LCD screen expires. After 15 min- utes elapses, the system should turn off.

GENERAL INFORMATION

Transmitter Wall Bracket

The transmitter can be hung on a wall using the bracket provided. Locate the bracket on an inside wall sufficiently far away from direct sources of heat such as a fireplace, incandescent lighting, or sunlight so it detects ambient room temperatures, not a single heat source. If the bracket is installed on a solid wood wall, drill 1/8 inch pilot holes and install with the screws provided. If it is installed on a plas- ter/wallboard wall, first drill two 1/4 inch holes into the wall, then use a hammer to tap in the two plastic wall anchors flush with the wall, then install the screws provided.

Transmitter Battery Life

Life expectancy of the alkaline batteries in the transmitter should be at least one season. Check batteries annually. When the transmitter no longer operates the remote receiver from a distance it did previously (i.e., the transmitter’s range has decreased) the batteries should be checked.

Receiver Batteries

Life expectancy of the alkaline batteries in the receiver one burn season. Replace with 4AA alkaline batteries at the beginning of each burn season.

11

Page 10 Page 12
Page 11
Image 11
Hearth and Home Technologies SMART-BATT-II General Information, Timer Operation, Transmitter Wall Bracket
Page 10 Page 12

SMART-BATT-II specifications

Hearth and Home Technologies has revolutionized the way we think about heating technology with its SMART-BATT-II system. This innovative product is designed to enhance efficiency and convenience in home heating. The SMART-BATT-II is a state-of-the-art battery backup system that ensures uninterrupted performance for your heating appliances, providing homeowners with peace of mind during power outages.

One of the standout features of the SMART-BATT-II is its advanced energy management system. This technology optimally manages power supply to the unit, allowing it to utilize energy from both the grid and backup sources. The system can intelligently switch between these power sources, ensuring that your heating appliances remain operational even when the electricity goes out. This capability is especially valuable in areas prone to outages, enabling families to maintain warmth and comfort during inclement weather.

The SMART-BATT-II utilizes high-capacity lithium-ion batteries, which are known for their durability and long life. These batteries provide enough backup power to operate heating systems for extended periods, offering an essential lifeline when traditional power sources are unavailable. The unit is equipped with smart charging technology, ensuring that the batteries recharge efficiently and extend their lifespan.

Another significant characteristic of the SMART-BATT-II is its user-friendly interface. Homeowners can easily monitor the battery status, power usage, and system performance through a simple display screen. Additionally, the system offers remote access capabilities, allowing homeowners to control and manage their heating system from anywhere via smartphone or tablet. This feature significantly enhances user convenience and facilitates better energy management.

Safety is also a priority with the SMART-BATT-II. The system includes built-in safety features such as overcharge protection and thermal management, ensuring that the unit operates safely and efficiently. Hearth and Home Technologies have also designed the SMART-BATT-II to be compact and easy to install, making it suitable for a wide range of home heating systems.

In summary, the SMART-BATT-II by Hearth and Home Technologies represents a significant advancement in home heating technology. With its robust energy management capabilities, high-capacity batteries, and user-friendly features, it provides a reliable and efficient solution for homeowners seeking consistent warmth and comfort. This innovative system is not just a backup; it is a forward-thinking solution designed for the modern home.
Top Page Image Contents