SMART-BATT-II Remote Control Kits

- Installation and Operating Instructions -

INTRODUCTIONFCCCE REQUIREMENTSREQUIREMENTS

The remote control system can be operated thermostati- cally or manually from the transmitter. The system oper- ates on radio frequencies (RF) within a 20 foot range. Can be used with IPI or Standing Pilot systems.

This remote control kit has a hand held transmitter that can be used as a remote on/off or as a thermostat. The trans- mitter display shows the current room temperature, target temperature, timer setting, on/off status, low battery indi- cator, current time and burner/valve operation.

If pertinent, see additional fireplace wiring diagrams on the following pages.

INSTALLATION PRECAUTIONS

This remote control kit is tested and safe when installed in accordance with this installation manual. Installation of this kit MUST be done by a qualified service technician. It is the responsibility of the installer to read all instructions before starting installation and to follow these instructions care- fully during installation. Modification of the remote control system or any of its components will void the warranty and may cause a fire hazard.

CAUTION: ALL Wiring should be done by a qualified electrician

CAUTION: All wiring should be done by a qualified electri- and shall be in compliance with CE.

cian and shall be in compliance with local codes and with the National Electric Code ANSI/NFPA No. 70-current (in the United States), or with the current CSA C22.1 Canadian Electric Code (in Canada).

WARNING:DOWARNING:NODOCONNECTNOT CONNECT230 VAC110WIRING-120 VACTO THEWIR- GAS CONTROL VALVE OF THIS APPLIANCE.

ING TO THE GAS CONTROL VALVE OF THIS AP- PLIANCE.

WARNING: CHANGES OR MODIFICATIONS TO THIS UNIT NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

NOTE: This equipment has been tested and found to com- ply with theCE. limitsThe operatorfor a Classis requiredB digitalto dodevice,as this pursuantmanual saysto Partso that15it ofwilltheworkFCCveryRulessmart.. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and re- ceiver.

-Connect the equipment into an outlet on a circuit differ- ent from that to which the receiver is connected.

-Consult the dealer or an experienced radio TV techni- cian for help.

Canadian Equipment Requirements

This digital apparatus does not exceed the (Class A/Class B)* limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Cana- dian Department of Communications. Le present appareil numerique n'emet pas de bruits radioelectriques depassant les limites applicables aux appareils numeriques (de la class A/de la class B)* prescrites dans le Reglement sur le brouillage radioelectrique edicte par le ministere des Com- munications du Canada.

This device complies with RSS-210 of Industry and Sci- ence Canada. Operation is subject to the following two con- ditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interfer- ence that may cause undesired operation of the device.

Printed in China Copyright 2006,

 

Hearth & Home Technologies Inc.

 

20802 Kensington Boulevard, Lakeville, MN 5504

100-909G 12/06

1

Page 1
Image 1
Hearth and Home Technologies SMART-BATT-II operating instructions Introductionfccce Requirementsrequirements

SMART-BATT-II specifications

Hearth and Home Technologies has revolutionized the way we think about heating technology with its SMART-BATT-II system. This innovative product is designed to enhance efficiency and convenience in home heating. The SMART-BATT-II is a state-of-the-art battery backup system that ensures uninterrupted performance for your heating appliances, providing homeowners with peace of mind during power outages.

One of the standout features of the SMART-BATT-II is its advanced energy management system. This technology optimally manages power supply to the unit, allowing it to utilize energy from both the grid and backup sources. The system can intelligently switch between these power sources, ensuring that your heating appliances remain operational even when the electricity goes out. This capability is especially valuable in areas prone to outages, enabling families to maintain warmth and comfort during inclement weather.

The SMART-BATT-II utilizes high-capacity lithium-ion batteries, which are known for their durability and long life. These batteries provide enough backup power to operate heating systems for extended periods, offering an essential lifeline when traditional power sources are unavailable. The unit is equipped with smart charging technology, ensuring that the batteries recharge efficiently and extend their lifespan.

Another significant characteristic of the SMART-BATT-II is its user-friendly interface. Homeowners can easily monitor the battery status, power usage, and system performance through a simple display screen. Additionally, the system offers remote access capabilities, allowing homeowners to control and manage their heating system from anywhere via smartphone or tablet. This feature significantly enhances user convenience and facilitates better energy management.

Safety is also a priority with the SMART-BATT-II. The system includes built-in safety features such as overcharge protection and thermal management, ensuring that the unit operates safely and efficiently. Hearth and Home Technologies have also designed the SMART-BATT-II to be compact and easy to install, making it suitable for a wide range of home heating systems.

In summary, the SMART-BATT-II by Hearth and Home Technologies represents a significant advancement in home heating technology. With its robust energy management capabilities, high-capacity batteries, and user-friendly features, it provides a reliable and efficient solution for homeowners seeking consistent warmth and comfort. This innovative system is not just a backup; it is a forward-thinking solution designed for the modern home.