2. Top Vent - Vertical Termination
V1 = 40 ft. Max. (12.4 m)
V1 = 3 ft. Min. (914 mm)
Note: If installing a vertical vent/ termination off the top of the appli- ance, the optional vertical termina- tion baffle should be used.
No Elbow
Figure 5.6
Flue Restrictor Instructions
1.Remove Exhaust Shield using a 1/4 inch nut driver by removing the four screws securing it in place (see Figure 5.7).
E X H A U S T |
S H IE L D |
F L U E |
R E S T R IC T O R |
Figure 5.7 |
2.Break the Flue Restrictor into two pieces. Do this by bending the part back and forth until it breaks (see Figure 5.8).
B R E A K
H E R E
Figure 5.8 Flue Restrictor
Heat & Glo • 6000G, | 15 |