Heat & Glo LifeStyle 6000G-IPI, 6000G-LP C. Finishing Material, Door, Maximum, Figure, Thickness

C. Finishing Material

It’s very important to know what kind of a door and what kind of finishing material is going to be used on the fireplace. The table below shows the door models and the finishing material thickness allowed. For an inside fit there is an available template to assist with sizing the finishing material.

		FINISH
DOOR	FIT	MATERIAL	SEE
		MAXIMUM	FIGURE
		THICKNESS
Folio	Inside	Any	11.4
Arcadia	Overlap	1 inch	11.5
	Inside	Any	11.6
Halston	Overlap	1 inch	11.5
	Inside	1 inch - 2 inch	11.7
Chateau	Overlap	1 inch	11.5
	Inside	Any	11.6
Valencia	Overlap	1 inch	11.5
	Inside	Any	11.6
Galleria	Overlap	1 inch	11.5
	Inside	1 inch - 2 inch	11.7

ELBOW

HEAT

SHIELD

Stop finishing material flush with opening.

Figure 11.4 Folio Door

Finishing materials 1 inch maximum thick.

Stop finishing material flush with opening.

Figure 11.5 Overlap Fit Door

	ELBOW
FINISHING	HEAT	FINISHING
MATERIAL	SHIELD	MATERIAL

DOOR

37 in.

(Outside door width)

37-1/4 in.

(Includes 1/8 in. opening each side of door)

33-3/4 in.	34 in.
37 in.
(Outside door width)
37-1/4 in.

(Includes 1/8 in. opening each side of door)

Finishing materials over 1 inch thick.

Figure 11.6 Inside fit door

1-2 IN. THICK	1-2 IN. THICK
FINISHING	FINISHING
MATERIAL	MATERIAL

*IF FINISHING MATERIAL IS THICKER THAN

2 IN., DOORS WILL ONLY OPEN

AS FAR AS PICTURED

DOORS

33 3/4	34 IN.
IN.

37 1/4 IN.

Finishing material between 1 and 2 inches thick.

Figure 11.7 Operable hinge door

42 Heat & Glo • 6000G, 6000G-IPI • 2103-900 Rev. M • 9/08