10 Appliance Setup
A. Remove the Shipping Materials
Remove shipping materials from inside or underneath the fi rebox.
WARNING
Shock Risk
Fire Risk
Use ONLY optional accessories approved for this appliance.
•Using
•Using
•Only Hearth & Home Technologies approved accessories may be used safely.
WARNING
Explosion Risk
•Follow rockwool placement instructions in this manual.
•Do NOT place rockwool directly over burner ports.
•Replace rockwool material annually.
Improperly placed rockwool interferes with proper burner operation.
B. Clean the Appliance
Clean/vacuum any sawdust that may have accumulated in- side the fi rebox or underneath in the control cavity.
•The appliance is shipped with the burner in place with the boxed up log set sitting on it. See Figure 10.1. Remove box.
•The refractory is not shipped with the appliance. The refractory must be ordered separately. Install the refractory following the installation instructions supplied with the kit.
•The grate is shipped on top of the appliance. See Figure 10.2. Remove the grate.
C. Lava Rock, Rockwool, Silica Rock Placement
Placing the Lava Rock
•Place the lava rock generously around the ember bed and up to the front lip of the hearth pan. You do not need ot use the whole bag; save the remaining amount for future use.
Figure 10.1 /Boxed Logs
Figure 10.3 Placing the Lava Rock
Figure 10.2 Shipping Location of Grate
Hearth & Home Technologies • 6100PLUS • | 21 |
