Heat & Glo LifeStyle AT-ZC manual GlassAssembly, Placement of the Ember Material

15

1.Lift the top trim door up and out of the unit.

2.Pull out and rotate glass release eye bolts at the top edge and remove the glass door from the unit.

1.Place the ember material onto the top of the burner.

•Remove the glass door from the unit.

•Cover the top of the burner with a single layer of ember material. Then sprinkle GE-93 on top of the burner.

•Save the remaining ember materials for use during fireplace servicing.

•Replace the glass door.

•Reset the three glass eye bolts, be sure they are securely latched.

•Replace the trim door.

GLASS

DOOR

Figure 10. GlassAssembly

Figure 11. Placement of the Ember Material