Step 8
Installing Trim
Surrounds
Combustible materials MUST NEVER overlap onto the front face.
WARNING - WHEN FINISHING THE FIREPLACE INSERT, NEVER OBSTRUCT OR MODIFY THE AIR INLET/OUTLET GRILLES ON THE INSERT IN
ANY MANNER.
For Masonry Fireplace Installation | |
FIREBOX |
|
| SURROUND |
TRIM DOOR |
|
| ON/OFF |
| SWITCH |
SURROUND | LOW VOLTAGE |
| WIRES |
For Zero Clearance Fireplace Installation | |
Note: See |
|
accessory parts |
|
page for trim door |
|
and surround | TRIM DOOR |
options. |
|
Figure 12
NOTE: REMOVE FRONT TRIM DOOR AND GLASS
DOOR ASSEMBLIES FROM THE INSERT BEFORE
SURROUND INSTALLATION.
1.Find the coiled low voltage wires and ON/OFF switch attached to outer right side of the insert. See Figure 12.
2.Disconnect the ON/OFF switch from the low voltage wire leads, and insert the short wires of the ON/OFF switch through the hole at the upper right corner of the surround and push the back of the switch through the hole - it will be retained in the hole.
16
