Installing the blade server bezel assembly

The following illustration shows how to install the bezel assembly on the blade server.

Bezel-assembly release

Bezel-assembly

 

release

Control-panel

Control panel

cable

connector

 

Complete the following steps to install the blade server bezel assembly:

1.Read the safety information beginning on page “Safety” on page vii and “Installation guidelines” on page 19.

2.Connect the control-panel cable to the control-panel connector on the system board.

3.Carefully slide the bezel assembly onto the blade server, as shown in the illustration, until it clicks into place.

44

Intel Server Compute Blade SBX82 Installation and User’s Guide

Page 58
Image 58
Intel SBX82 manual Installing the blade server bezel assembly