Intel SBX82 manual Option problems, Power problems

Option problems

Symptom		Suggested action
An option that was just	Make sure that:
installed does not work.	•	The option is designed for the blade server.
	•	You followed the installation instructions that come with the option.
	•	The option is installed correctly.
	•	You have not loosened any other installed options or cables.
An option that used to	Make sure that all of the option hardware and cable connections are secure.
work does not work now.	If the option comes with its own test instructions, use those instructions to test
	the option.

Power problems

Symptom			Suggested action
The blade server does not	1.	Make sure that:
turn on.		a.	The power LED on the front of the SBCE unit is lit.
		b. The LEDs on all the power modules are lit.
		c.	If the blade server or attached storage expansion unit is in blade bay 7
			through 14 in the SBCE unit. Ensure power modules are installed in all
			four power bays.
		d.	The power-on LED on the blade server control panel is flashing slowly.
			• If the power LED is flashing rapidly and continues to do so, the
			blade server is not communicating with the management module;
			reseat the blade server and go to step 3.
			• If the power LED is off, either the blade bay is not receiving power,
			the blade server is defective, or the LED information panel is loose
			or defective.
		e. Local power control for the blade server is enabled (use the
			management-module Web interface to verify), or the blade server was
			instructed through the management module to turn on.
	2. If you just installed an option in the blade server, remove it, and restart the
		blade server. If the blade server now turns on, troubleshoot the option (see
		the documentation that comes with the option for information).
	3.	Try another blade server in the blade bay; if it works, replace the faulty blade
		server.

64 Intel Server Compute Blade SBX82 Installation and User’s Guide