Intel SBX82 manual Installing and removing the blade server from the Sbce unit

•Do not leave the device where others can handle and possibly damage it.

•While the device is still in its non-conductive package, touch it to an unpainted metal part of the SBCE unit or any unpainted metal surface on any other grounded rack component in the rack you are installing the device in for at least 2 seconds. This drains static electricity from the package and from your body.

•Remove the device from its package and install it directly into the blade server without setting it down. If it is necessary to set the device down, place it back into its non-conductive package. Do not place the device on your blade server cover or on a metal surface.

•Take additional care when handling devices during cold weather. Heating reduces indoor humidity and increases static electricity.

Installing and removing the blade server from the SBCE unit

To install or remove a blade server from the SBCE unit, see the documentation that came with your unit for instructions.

Opening the blade server cover

The following illustration shows how to open the cover on the blade server.

Blade-cover release

Blade-cover release

20 Intel Server Compute Blade SBX82 Installation and User’s Guide