Heat & Glo LifeStyle SLR-B (COSMO) Framing and Clearances, Selecting Appliance Location

5Framing and Clearances

A. Selecting Appliance Location

When selecting a location for the appliance it is important to consider the required clearances to walls (see Figure 5.1).

WARNING! Risk of Fire or Burns! Provide adequate clearance around air openings and for service access.

Due to high temperatures, the appliance should be locat- ed out of traffic and away from furniture and draperies.

NOTICE: Illustrations reflect typical installations and are FOR DESIGN PURPOSES ONLY. Illustrations/diagrams are not drawn to scale. Actual installation may vary due to individual design preference.

It is important to follow the framing and fi nishing instruc- tions step by step to ensure proper placement of fi replace in the surrounding framing/fi nishing materials.

Unlike many traditional, single sided Heat & Glo fi replaces, the SLR-B is recessed into surrounding framing. The left and right nailing tabs were designed to ensure the fi replace is recessed to the correct location within the framing materials. Refer to Section 13 for detailed instructions on fi nishing.

A

A

E

1 IN.

B

C TOP VENT

ONE 900 ELBOW

D*

ALCOVE

INSTALLATION

TOP VENT

ONE 90° ELBOW

B

F

		A		B	C	D	E	F
	Inches	53-1/32		48	75	See Section D.	19-9/32	17-3/4
	Millimeters	1347		1218	1905	Figure 5.5 & 5.6	490	451
Figure 5.1 Appliance Locations
			Heat & Glo • SLR-B • 2195-900 Rev. P • 12/11					17