Heat & Glo LifeStyle SLR-B (COSMO) owner manual Installed Horizontally

1. Top Vent - Horizontal Termination - (continued)

Top Vent - Horizontal Termination

Venting with 3 elbows

V Minimum				H1 + H2 + H3 MAXIMUM
				SLR-B (NG ONLY)
3 ft.		914 mm		15 ft.	4.6 m
	H1	+ H2 + H3	MAX. = 15 ft. (4.6 m)
		V1 MAX. = 7 ft (2.1 m)

Note: Use SLP Series components only.

Note: There MUST be a 25% reduction in total H when using

flex vent except when using the simple up and out installation (see Figure 7.3).

CAUTION: The SLP-HRC-SS and SLP-HRC-ZC-SS termination caps are not approved for use with pro- pane (LP) fuel. May lead to elevated glass temper- ature that may cause tempered glass breakage.

INSTALLED

HORIZONTALLY

H2

H1

V1

H3

INSTALLED

HORIZONTALLY

Figure 7.7

28 Heat & Glo • SLR-B • 2195-900 Rev. P • 12/11