1.4 FEATURES
•Designed for cooling only.
•Powerful and quiet cooling.
•
1.5 CONTROL LOCATIONS
•Side
•Built in adjustable THERMISTOR and THERMOSTAT.
•Washable
•Compact size.
1.5.1COOLING ONLY MODEL
• OPERATION
REMOTE CONTROL SIGNAL RECEIVER
TEMPERATURE SETTING
• Use this button to automatically control the temperature of the room.
The temperature can be set within a range of 60° F to 86° F by increments of 1° F.
POWER
TIMER
-
•You will usually use
•With unit running, use Timer to set number of hours until
•For your sleeping comfort, once Time is set, the Temperature setting will raise 2° F after 30 min., and 2° F after another 30 min.
•Every time you push Timer button, it advances the Timer setting as follows: 1 Hour → 2 Hours → .... → 12 Hours maximum.
- START TIME
•With unit not running, use Timer to set number of hours before unit starts.
•Every time you push Timer button, it advances the Timer setting as follows: 1 Hour → 2 Hours → ..... → 12 Hours maximum.
•To turn the air conditioner ON, push this button.
To turn the air conditioner OFF, push the button again.
•This button takes priority over any other button.
•When you first turn it on, the unit is in cool mode, at High fan speed, and set at a temperature setting of 72° F.
FAN SPEED
•Every time you push this button, it advances the setting as follows:
{High → Low → Med → High}
MODE
-Every time you push this button, the air conditioner alternates between COOL, MONEY SAVER® and FAN.
-MONEY SAVER:
•The fan stops when the compressor stops cooling. Approximately every 3 minutes the fan will turn on and the unit will check the room air to determine if cooling is needed.
• VENTILATION
Push the lever to the "CLOSE" position to cool, heat or recirculate room air only.
Pull the lever to the "OPEN" position to exhaust smoke or stale air from the room.
This feature is best used in conjunction with the FAN ONLY
position. | PULL OPEN / PUSH CLOSE |
