PROCEDURE C
7 Remove the backing from the 13" shim strips and attach them as shown below in Fig. 39. The higher portion of shim is to be placed in front of the rib on the base of wall sleeve.
|
|
|
|
|
|
|
1" high |
|
|
|
|
| 3/4" High |
|
|
|
|
| ||
|
|
|
| |||
|
|
|
|
|
| |
|
|
|
|
|
|
|
FIG. 38
Shim (2EA)
6" |
|
| 6" | |
|
|
|
|
|
FIG. 39
8 Install the new unit into the wall sleeve
9 To assemble trim, snap the tab of each piece into the slot of the other piece as shown below. Slide trim over the front of the air conditioner until trim is flush with sleeve as shown below.
Trim (2 ea)
Wall
FIG. 40
CAUTION
•Air conditioners covered in this manual pose an excessive weight hazard. Two or more people are needed to move and install the unit.
To prevent injury or strain, use proper lifting and carrying techniques when moving unit.
•When handling the air conditioner, be careful to avoid cuts from sharp metal fins on front and rear coils.
•Make sure air conditioner does not fall during removal.
— 21—
