Operation
Operation
Features
•Designed for COOLING ONLY.
•Powerful and whispering cooling.
•
•Side
•
•Washable
•Compact size
•Reliable and efficient rotary compressor
Control
Locations
Function
of
Controls
1. Cooling Only Model
• VENTILATION
The ventilation lever must be in the CLOSE position in order to maintain the best cooling conditions. When a fresh air is necessary in the room, set the ventilation lever OPEN position.
The damper is opened and room air is exhausted.
NOTICE Before using the ventilation feature, make the lever, as shown. First, pull down part 
to horizontal line with part 
.
• THERMOSTAT
CLOSE 
VENT 
OPEN
Thermostat will automatically control the temperature of the room. Select a higher number for a cooler tem- perature in the room. The temperature is selected by positioning the knob to the desired position.
The 5 or 6 position is a normal setting for average conditions.
• OPERATION
OFF | : Turns the air conditioner off. |
MED FAN | : Permits the medium fan speed operation |
| without cooling. |
LOW FAN | : Permits the low fan speed operation |
| without cooling. |
HIGH COOL : Permits cooling with the high fan speed operation.
MED COOL : Permits cooling with the medium fan speed operation.
LOW COOL : Permits cooling with the low fan speed operation.
• AUTO SWING
ON | : Air swing is operated while OPERATION knob is |
| set to the COOL position. |
OFF | : Stops the operation of air swing. |
ThermostatOperation
5 |
| Auto Swing |
| Off |
6 |
|
| ||
4 |
| Med | High | |
| Off | On | ||
|
|
| Fan | Cool |
3 | 7 |
|
|
|
2 | 8 |
|
|
|
1 | 9 |
| Low | Med |
| Fan | Cool |
Low Cool
