3.INSTALL THE AIR CONDITIONER IN THE WINDOW
a.Carefully lift the air conditioner and slide it into the open window. Make sure the bottom guide of the air conditioner drops into the notches of the
L bracket. See Figure. 28.
INNER SILL
OUTER SILL | TYPE A INSIDE |
| CENTER LINE |
| 8" |
SHORT SIDE | 8" |
IMPORTANT :
When the air conditioner drops into the L bracket, the air conditioner will be centered in window opening as shown in Figure. 29.
b. While steadying the air conditioner, carefully bring the window sash down behind the upper guide of the air conditioner, as shown in Figure. 30.
4. SECURE THE GUIDE PANELS
Figure 28
Figure 29
OUTSIDE
LBRACKET
CENTER LINE
Extend the guide panels (TYPE F) to fill the window opening using 4 screws (TYPE B) to secure them, as shown in Figure. 31.
5.INSTALL THE SASH SEAL AND SASH LOCK
a.Cut the sash seal (TYPE E) to the window width. Stuff the sash seal between the glass and the window to prevent air and insects from getting into the room, as shown in Figure. 31.
b.Fasten the L bracket using a (TYPE A) screw, as shown in Figure. 31.
6.Window installation of room air conditioner is now completed. See ELECTRICAL DATA for attaching power cord to electrical outlet.
WINDOW FRAME
UPPER GUIDE SEAL
ABOUT 1/4"
BOTTOM
GUIDE
LBRACKET
Figure 30
LBRACKET
TYPE A
SASH SEAL
(TYPE E)
TYPE B
push
Figure 31
DRAIN CAP
DRAIN PIPE
— 14—