Heath Zenith SL-5330 manual Operation, Features, Requirements, Mode Switching Summary, On-Time

Motion Sensor Light Control with Protective Lamp Shields

Model SL-5330

Features

•Turns on lighting when motion is detected.

•Automatically turns lighting off.

•Photocell keeps the lighting off during daylight hours.

This package includes:

Lamp Holders

OPERATION

Mode:	On-Time:	Works: Day	Night
Test	5 Sec	x	x
Auto	1, 5, 20 min.		x
Manual	Until Dawn*		x

* resets to Auto Mode at dawn.

Note: When first turned on wait about 1 1/2 minutes for the circuitry to calibrate.

TEST

Put ON-TIME switch on the sensor ON-TIMEbottom to TEST.

TEST 1 5 20

AUTO

Put the ON-TIME switch in the 1, 5	ON-TIME
or 20 minute position.
	TEST 1 5 20
MANUAL MODE

Mounting Strap

Rubber Plug

Cover	Sensor
Plate
	Plastic Hanger
	Light Control

Manual mode only works at night because daylight returns the sensor to AUTO.

Flip the light switch off for one second then back on to toggle between AUTO and MANUAL MODE.

Manual mode works only with the ON-TIME switch in the 1, 5, or 20 position.

1 Second OFF

then...

Mounting Bolt

2 WireGasket

Connectors

6 Screws

(3 sizes included)

2 PAR Lamps

Requirements

•The Light Control requires 120-volts AC.

•If you want to use the Manual Mode, the control must be wired through a switch.

•Some codes require installation by a qualified electrician.

•This product is intended for use with the enclosed gasket and with a junction box marked for use in wet locations.

© 2003 DESA Specialty Products™

... back on.

Mode Switching Summary

	TEST	Move ON-TIME Switch to
			1, 5 or 20 minutes
	AUTO		Flip light switch off
			for one second then
			back on*
MANUAL MODE

*If you get confused while switching modes, turn the power off for one minute, then back on. After the calibration time the control will be in the AUTO mode.

598-1131-01