Magnum 4K8 Switches Installation and User Guide (10/04)
2.3Features and Benefits
100Mb switching services for large, high performance Ethernet LANs Magnum 4K8 Switches provide Fast Ethernet switching on all ports. They perform high speed filter/forward operations on the traffic, giving each port’s segment a full 100Mb (or 10 Mb) of bandwidth.
Option to configure a fiber port (port 9), all fiber connector types Fiber port modules are available with 100Mb mm ST, SC, VF-45, MTRJ single-mode SC, and 10 Mb ST-type connectors. The configuration of the fiber port, in the factory or in the field, allows the 4K8 Switches to adapt to mixed and changing fiber types in any application.
Manual Switch “F-H” for user configurable
The Manual switch “F-H” allows the user to setup port#9(fiber port) as per their convenience to 100Mbps full-duplex at “F” and half- duplex at “H” mode by sliding the manual switch under the FPM Port.
Eight RJ-45 (copper) ports, 10/100 auto-negotiation
RJ-45 ports provide twisted pair segment connections, with N-way auto- negotiation per port and full and half manual settings for optional port.
Full-duplex or Half-duplex operation, auto-sensing
All fiber and RJ-45 (copper) ports are capable of half- or full-duplex, individually selected. All RJ-45 ports support 10/100 auto-negotiation.
Rack-mounting may be std or “reverse”,19 inch, ETSI or 23” Telco The standard rack mounting provides Ethernet ports and status LEDs in front, service connections (power input and Ethernet cables) in the rear. “Reverse” rack mounting provides status LEDs in front and all cabling connections in the rear. Standard 19’ rack mount brackets are included, while ETSI and 23” Telco are optional.
Plug-and-Play installation for high performance switching Magnum 4K8 Switches are self-learning for node addresses. They can be placed into operation without complex set-up procedures, even in large networks. They operate transparent to system software.
Standard AC power input, -48VDC, 24VDC, or 125VDC is available Standard AC power input is IEC plug, auto-ranging for worldwide use. For special applications, models with –48VDC, 24VDC, or 125VDC are available. Dual source DC input can also be selected and configured on the –48VDC, 24VDC, and 125VDC input models.
Extended Temperature Operation
The Magnum 4K8 has been tested for operation at temperatures of –5’C to 55’C. NEBS-certified models have been tested to a greater range per NEBS Level 3 requirements. For details, email mktg@garrettcom.com
www . GarrettCom . com
