3Com T1/PRI manual Overview, Supported Features, Accessing, User Interface

1

OVERVIEW

	This chapter contains an overview of supported features and instructions
	for accessing the Dual T1/PRI Network Application Card (NAC) through
	the user interface (UI) console.
Supported Features	These features are supported in this release:
	■ RFC-1406 (Definitions of Managed Objects for the DS1 and E1
	Interface Types) Error Counters—UAS, CCS, and SEFS
	■ Increased Number of Modem Pools—from 4 to 12
Accessing the	To access the Dual T1/PRI NAC’s UI console, connect the following cables
User Interface	to the corresponding Network Interface Card (NIC) RS-232 port.
	This port’s baud rate is defined by DIP switch settings on the Dual T1/PRI
	NAC. Refer to the NAC’s Getting Started Guide for more information.