3Com T1/PRI manual Configuring inbound call routing, PHIDX#ph=PH#,ct=x

Configuring Inbound Call Routing 2-11

Menu Option 3	Configuring inbound call routing
	Configure inbound phone numbers assigned to a span line for a specific
	call type, analog or digital, for routing purposes.
	In order to route analog calls, the card must be configured to accept
	analog in menu option 2.
	Use the following syntax to assign a call type to an inbound phone
	number:
	PHIDX#:ph=PH#,ct=x
	Where:
	PHIDX# = phone number index (1–48)
	ph = keyword for specifying the phone number
	PH# = numeric phone number (up to 18 numeric characters
	including (), -, #, and *)
	ct = keyword for call type (A for analog, D for digital)
	To remove call routing assignments, use this syntax:
	PHIDX#:rmv (for removing a phone number; set the call type for
	this index to digital (default))
	PHIDX#:ph=rmv (for removing a phone number from the
	specified index)
	Where:
	PHIDX# = phone number index (1–48)
	rmv = keyword for removing a phone number from its
	corresponding phone number index
	ph = keyword for specifying the phone number
Menu Options	Checking the inbound call routing configuration status
4 and 5	The T1/PRI allows for 48 phone number indices to be configured for both
	span lines. View the configuration status of phone number indices 1–24
	using menu option 4 and indices 25–48 using option 5.