3Com T1/PRI manual Card, Menu Option 9 Allowing ISDN-GWC termination, UI console’s main menu

2-14CHAPTER 2: DUAL T1/PRI CONFIGURATION

Menu Option 9 Allowing ISDN-GWC termination

This is the maximum number of digital (such as Terminal Adapter v.110, v.120) calls terminated directly by the ISDN gateway. All other digital calls are terminated by the Quad (I-modem). Maximum performance is generally obtained by disturbing the digital calls to the Quad (I-modem). Thus, this parameter should be selected to be zero for T1/PRI.

Configuring the	Configure Dual T1/PRI NAC chassis options by selecting option 3 from the
Card	UI console’s main menu.
			3Com (c) 1995, 1996, 1997, 1998
			Dual T1/PRI Application Card Revision		3.1.4 (Card Id: 27)
			Boot Code Linked Date	: Mon Dec 04 17:41:48 1995
			Operation Code Linked Date: Tue Feb 23 16:41:51 1999
			Main Menu
			1 Command
			2 Status
			3 Card Configuration
			4 Inbound Call Routing Configuration
			5 Span Line 1 Configuration
			6 Span Line 2 Configuration
			7 SW Fault Manager Event Logging
			8 Logout
			Enter menu selection and press Return.
			Menu Selection (1-8):
	Pressing option 3 at the main menu prompt produces this screen:
		Card Configuration		Current Setting
		1	Save current Configuration to NVRAM
		2	Restore NVRAM Configuration
		3	Restore Default Configuration
		4	Timing Source Priority Assignment		Span-1=1 Span-2=2
		5	Chassis Slot Device Configuration
		6	Modem Routing Method		Next Available
		7	Configure Local Console Password
		8	Change DS0 state on Quad Modem NAC action Disabled
		9	Companding Code Configuration
		(NOTE: Changing configuration parameters may affect calls in progress.)
		Enter menu selection and press Return or press Esc to exit.
Menu Option 1 Saving configuration changes to NVRAM
	This option allows you to save your settings to NVRAM. If power to the
	NAC is lost or the card is rebooted, any changes made to the UI console
	and saved to NVRAM will be restored.