TROUBLESHOOTING
Light will not come on:
•Circuit breaker is off. Turn breaker back on.
•Bulb is burned out. Replace light bulb.
•Photo Sensitivity is set to DARK. Rotate the adjustment clock- wise towards the LIGHT position.
•Control is in the “Off” position. Set to Auto or On.
•Control may be wired incorrectly. See Troubleshooting Wiring Connections, page 7.
Light will not turn off:
•Control is in the “On” position. Set to Auto or Off.
•Control time period set too long. Set to shorter time period.
•Control may be wired incorrectly. See Troubleshooting Wiring Connections, page 7.
Remote switch does not work:
•The remote switch only works to turn the light on in the Auto mode. Put sensor in the Auto mode.
•Control may be wired incorrectly. See Troubleshooting Wiring Connections, page 7.
In Auto mode, light comes on randomly:
•Objects in detection area which heat and cool, such as air vents or appliances, may trigger the control. Also, check wiring. See Troubleshooting Wiring Connections, page 7.
•The remote switch may have been flipped on.
In the Auto mode, light does not turn on:
•If there is too much light already in the room, the light may not come on. Turn the Photo control clockwise towards the any light level position.
