Heath Zenith UT-6028-BZ, UT6028-WH Motion Sensor Controls, Motion Sensor Coverage Area

3.Adjust RANGE Control. To increase sensitivity, turn the RANGE control toward MAX. To decrease sensitivity, turn the RANGE control toward MIN. Note: If the RANGE is set too high, false triggering may result in some environments.

Note: When using test mode to check operation in the day time:

A.Set the DETECT control switch to DAY/NIGHT and

B.Set the ON-TIME control to TEST.

4.Set ON-TIME Control. Determine the amount of time you want the connected device to stay on after motion is detected (1 or 5 minutes). Slide the ON-TIME control to the corresponding setting.

IMPORTANT: Avoid Aiming Control At:

•Objects that change temperature rapidly, such as heating vents, fans, and air conditioners. These air sources could cause false triggering.

•Areas where pets or traffic may trigger the control.

•Nearby large, light colored objects reflecting light may trigger the shut-off feature. Do not point other lights at the sensor.

Outdoor Motion Sensor

	ON-TIME	RANGE
	(MINUTES)	MAX MIN
ON-TIME Control	5 1 TEST

LED Indicator Range Control

Motion Sensor Controls

180°

8 ft.

(2.4 m)

70ft.

(21 m)

Maximum Range				Maximum
			Coverage Angle
		Motion Sensor Coverage Area
				Motion
	Motion
	Sensor			Sensor
Least Sensitive			Most Sensitive

The detector is most sensitive to motion across its field of view.

Motion Sensor Sensitivity

Aim Sensor Down	Aim Sensor Higher
for Short Coverage	for Long Coverage

Adjusting Motion Sensor Coverage

598-1296-02