TECHNICAL SPECIFICATION

MAXIMUM OPERATING CONDITIONS

Maximum service pressure (tank full of water)

-Primary circuit: 3 bar

-Secondary circuit: 10 bar

Test pressure (tank full of water)

-Primary circuit: 4.5 bar

-Secondary circuit: 13 bar

Operating temperature

- Maximum temperature: 90°C

Water quality

•Chlorures: < 150 mg/l (304)

<2000 mg/l (Duplex)

•6 ≤ ph ≤ 8

DOMESTIC HOT WATER PERFORMANCES

 

 

HM 201

 

 

 

Peak delivery at 40°C

L/10’

1745

Peak delivery at 45°C

L/10’

1489

Peak delivery at 60°C

L/10’

971

Peak delivery at 70°C

L/10’

763

Peak delivery at 80°C

L/10’

586

 

 

 

Peak delivery at 40°C

L/60’

6690

Peak delivery at 45°C

L/60’

5667

Peak delivery at 60°C

L/60’

3534

Peak delivery at 70°C

L/60’

2554

Peak delivery at 80°C

L/60’

1723

 

 

 

Continuous delivery at 40°C

L/h

6117

Continuous delivery at 45°C

L/h

5039

Continuous delivery at 60°C

L/h

2914

Continuous delivery at 70°C

L/h

2128

Continuous delivery at 80°C

L/h

1468

 

 

 

N.B.:

The outputs above are given for a hot water temperature of 90°C and a cold water temperature of 10°C.

HEATMASTER® SETTING INSTRUCTIONS

Description

The HeatMaster® 201 range is equipped with an electronic controller (MCBA) which controls the burner (start-up, safety, and modulation) and allows the controller to be adapted to the selected application.

The MCBA system includes a controller with 3 levels for setting the parameters: manufacturer, installer, and user. It includes 3 temperature sensors located in the primary and secondary circuits.

There are two operating modes:

1. Heating mode

The T° is set by the user in the range 60 to 90°C.

•Differential “ON” starts the burner.

•Differential “OFF” stops the burner.

•PI controller (Proportional Integral) in “Heating” mode.

•The controller compares the primary temperature with the setting and the module.

The room thermostat detects the demand for heat.

2.Hot water mode (with priority to the hot water)

The T° is set by the user in the range 60 to 90°C.

The sensor located in the secondary tank detects the demand for hot water.

As soon as the draw-off is detected, the controller goes to “demand for hot water” mode:

•Differential “ON” starts the burner.

•Differential “OFF” stops the burner.

•PI controller (Proportional Integral) in “Hot water” mode.

•The controller compares the primary temperature with the setting and the module.

•The charging pump starts up.

•The heating circulator pump is no longer supplied.

•The burner starts and the controller controls the modulation based on the primary pump.

Parameters accessible by the user

1.“Hot water” temperature, which can be set to 20 - 90°C.

2.Hot water mode ON/OFF.

3.Heating mode: ON/OFF.

4.“Heating” temperature, which can be set to 60 - 90°C.

Parameters accessible for “service”

Main basic characteristics:

-Hot water priority active.

-Demand for heat detected by the room thermostat.

-Only one heating circuit.

An access code is required to access “Service” parameters.

Please see pages 17 to 19 for further details.

7

Page 8 Page 10
Page 9
Image 9
Heatmaster 201 manual Maximum Operating Conditions, Domestic HOT Water Performances, Heatmaster Setting Instructions
Page 8 Page 10

201 specifications

The Heatmaster 201 is an advanced wood stove designed for optimal heating efficiency and user comfort. This high-performance heating solution incorporates innovative technologies that enhance its functionality and appeal, making it a popular choice for homeowners seeking a reliable and eco-friendly wood-burning option.

One of the standout features of the Heatmaster 201 is its robust construction. Built from high-quality materials, it ensures durability and longevity, capable of withstanding the rigors of regular use. Its heavy-duty steel body provides excellent heat retention, allowing for a more prolonged and even distribution of warmth throughout the space.

The Heatmaster 201 employs a clean-burning technology that helps reduce emissions, making it an environmentally friendly choice. This technology not only minimizes the environmental impact but also improves fuel efficiency. It burns wood more completely, resulting in less creosote buildup in the chimney, thus reducing the risk of chimney fires and the need for frequent cleaning.

This stove features a large firebox, allowing for longer burn times. Users can enjoy extended periods of heat without the constant need to reload with fuel. The design also accommodates various log sizes, providing flexibility in fuel choices. This versatility makes it easier for homeowners to utilize available wood resources effectively.

Moreover, the Heatmaster 201 includes an airwash system that keeps the glass door clean, allowing for an unobstructed view of the fire. This not only enhances the aesthetic appeal of the stove but also ensures that users can monitor the fire's activity without the distraction of soot accumulation.

The installation of the Heatmaster 201 is simplified further by its compatible venting options. Whether through a chimney or direct vent systems, users can choose the setup that best suits their home layout. Additionally, safety features, including a secure ash pan and heat-resistant door handles, ensure safe operation.

In conclusion, the Heatmaster 201 is a remarkable wood stove that combines durability, efficiency, and user-friendly design. With its clean-burning technology, robust construction, and ease of maintenance, it stands out as an exceptional choice for those looking to enhance their heating solutions while minimizing environmental impact.
Top Page Image Contents