![](/images/new-backgrounds/1061549/6154915x1.webp)
TNT Physical Specifications
Mineral tank sizes shown are with composit/FRP tanks.
|
|
| RECOMMENDED BRINE TANK | MINERAL TANK | APPROXIMATE | |||
| PIPE SIZE | MINERAL TANK | SIZE | SALT STORAGE | GRAVEL UNDERBEDDING | SHIPPING WEIGHT | ||
MODEL | (INCHES) | (INCHES) | (INCHES) | ( LBS) | 1/4" X 1/8" | #20 | SINGLE | TWIN |
3 | 24 X 72 | 30 X 50 | 1,110 | 0 | 150 | 1085 | 2145 | |
3 | 30 X 72 | 30 X 50 | 1,110 | 200 | 75 | 1160 | 2295 | |
3 | 30 X 72 | 39 X 48 | 2,030 | 200 | 75 | 1600 | 3120 | |
3 | 36 X 72 | 39 X 48 | 2030 | 300 | 150 | 1835 | 3590 | |
3 | 36 X 72 | 39 X 48 | 1,640 | 300 | 150 | 2115 | 4135 | |
3 | 42 X 72 | 42 X 60 | 2,580 | 500 | 175 | 3475 | 6325 | |
3 | 42 X 72 | 50 X 60 | 4,130 | 500 | 175 | 4280 | 8560 | |
3 | 48 X 72 | 50 X 60 | 3,495 | 700 | 200 | 4800 | 8760 |
TNT Capacity Ratings
| RESIN |
|
| RATED CAPACITY |
| FLOW RATES (gpm) | BKW | |
|
| LOW SALT | MEDIUM SALT | HIGH SALT |
|
| ||
MODEL | CU.FT. | GRAINS/LBS | GRAINS/LBS | GRAINS/LBS | 15 PSI | 25 PSI | GPM | |
10 |
| 190,000/60 | 280,000/100 | 320,000/150 | 120 | 170 | 12 | |
10 |
| 190,000/60 | 280,000/100 | 320,000/150 | 175 | 225 | 20 | |
15 |
| 285,000/90 | 420,000/150 | 480,000/225 | 158 | 212 | 20 | |
15 |
| 285,000/90 | 420,000/150 | 480,000/225 | 200 | 278 | 30 | |
20 |
| 380,000/120 | 560,000/200 | 640,000/300 | 189 | 257 | 30 | |
25 |
| 475,000/150 | 700,000/250 | 800,000/375 | 212 | 280 | 40 | |
30 |
| 570,000/180 | 840,000/300 | 960,000/450 | 215 | 282 | 50 | |
40 |
| 760,000/240 | 1,120,000/400 | 1,280,000/600 | 213 | 280 | 50 |
1. Steel tank design configurations available up through 60” tank diameters. Consult factory for details.
OPERATING CONDITIONS
1.Water Pressure 30 - 100 psi.
2.Water temperature is not to exceed 110°F and the unit cannot be subject to freezing conditions. Consult factory for higher water temperature applications.
3.Limit of 2 ppm of Ferrous Iron. Add 3 grains per gallon of hardness for each ppm of iron present.
4.Flex connectors and vacuum breakers are required when using the PolyGlass Composite mineral tanks.
5.Backwash flow rates are calculated at 4 gpm per sq. ft. of bed area and rounded off based on 50ºF water temperature.
TNT Series Fiberglass Dimensions
with Six-Inch Flange Opening
|
| HEIGHT | INLET/OUTLET HEIGHTS | SUGG. WIDTH | |||
MODEL | TOP MOUNT | SIDE MOUNT | TOP MOUNT | SIDE MOUNT | SINGLE | TWIN | |
HT* |
| HS** | IT | IS |
|
| |
101 |
| 87.5 | 82.5 | 51 | 62 | 99 | |
101 |
| 87.5 | 80 | 51 | 68 | 108 | |
112 |
| 96.5 | 80 | 51 | 83 | 117 | |
112 |
| 97 | 81 | 51 | 83 | 129 | |
112 |
| 97 | 81 | 51 | 83 | 129 | |
113 |
| 104.5 | 92 | 51 | 92 | 144 | |
113 |
| 104.5 | 92 | 51 | 92 | 144 | |
116 |
| 103 | 93 | 51 | 106 | 164 |
All dimensions ±1” and are subject to change without notice. Use as reference only. *Allow additional 12” for resin filling on HT dimension.
**Allow additional 18” for resin filling on HS dimension. Call factory for optional tank & dimensional configurations.
Product Improvement designs are subject to change without notice.
HELLENBRAND, INC.
www.hellenbrand.com
DEALER NAME: