Henkel 9000 operation manual 1Warnings and Precautions, Retain This Manual For Future Reference

1Warnings and Precautions

•OBSERVE ALL WARNINGS. READ and UNDERSTAND all instructions in the manual before attempting to install and operate this equipment.

•This equipment has been designed and tested for use with Loctite® anaerobic products.

•DO NOT USE equipment for other than intended use.

•BE SURE that all adhesives, solvents, or fluids used are chemically compatible with the wetted parts of the equipment.

•ALWAYS READ the Material Safety Data Sheet(s) before using adhesives, solvents, or any other chemicals in this equipment. COMPLY with ALL WARNINGS and SAFETY INSTRUCTIONS AS STATED.

•ALWAYS WEAR protective eye wear, gloves, clothing, and respirator as recommended in this manual or the Material Safety Data Sheet(s).

•Any misuse of the equipment or accessories, such as over-pressurizing, modifying parts, using incompatible chemicals, adhesives, or worn, damaged or not recommended parts, can cause rupture or breakage and result in fluid injection, splashing in the eyes or on the skin, or other serious injury or property damage.

•NEVER alter or modify any part of this equipment. Doing so will void the warranty and could result in a malfunction.

•CHECK the equipment regularly and repair or replace worn or damaged parts immediately.

•NEVER exceed the recommended working pressure or the maximum air inlet pressure stated on the equipment or in the manual.

•Properly ground all electrical components as recommended in the manual or technical data.

•Always KEEP HANDS and FINGERS away from moving parts to reduce the risk of injury.

•ALWAYS RELIEVE any pressure and turn off all power sources when checking or servicing any part of the equipment to reduce the risk of serious injury.

•RETAIN THIS MANUAL FOR FUTURE REFERENCE.

2