2
Introduction 
The Loctite® Series 9000 Rotospray Pump will apply a metered amount of Loctite® anaerobic products to a Rotospray centrifugal force dispensing head.
The Loctite Series 9000 Rotospray Pump is pneumatically operated and needs a
The Loctite Series 9000 Rotospray Pump is usually part of a system that consists of the following components:
1.A gravity reservoir to supply product to the Loctite Rotospray Pump.
2.The Loctite Rotospray Pump itself.
3.A Rotospray centrifugal force dispense head.
4.A product tube between the pump and dispense head.
5.An
This manual will cover the Loctite Series 9000 Rotospray Pump part number 983330 only.
The Loctite Series 9000 Rotospray Pump is designed to pump anaerobic materials with viscosity <100,000cps that can be gravity fed to the pump. The pump displacement range is 0.02 cc to 0.40 cc.
Typical Loctite® Products are:
Loctite product 271™, 277, 620, 635, 640, 11264, 11358, 11747, and 12019.
The Loctite Rotospray Pump is not suitable for dispensing moisture cure products such as RTV Silicones or Cyanoacrylates.
Because The Loctite Rotospray Pump is pneumatic, the only utility needed is compressed air. See the specifications on page 14 for the air quality requirements.
Because anaerobic products are being dispensed, the parts which come in contact with the Loctite Anaerobic products are made as inert as possible. This helps prevent product curing within the system. In addition, the pump is designed with a minimum of dead areas or close clearances where anaerobic curing can start.
Items Supplied:
993330 Loctite Series 9000 Rotospray Pump includes: Packaging and Inserts.
(1)Loctite Rotospray Pump consisting of a pump section and an actuator section.
(1)Mounting Bracket (983335).
(1)Feedline Accessory Kit (983356).
(1)Air Line Kit (983482).
(1)Instruction Manual (983355).
Note:
See the Spare Parts List on page 11 for available spare parts.
3
