Henny Penny HHC-993 SP-1 Fahrenheit/Celsius, SP-2 Lock/Unlock, SP-3 Air Temperature Setpoint

Model HHC-990

4-3. SPECIAL PROGRAMMING This mode allows you to program the following:

SP-1 • Fahrenheit/celsius

SP-2 • Lock/unlock

SP-3 • Air temperature setpoint

SP-4 • Humidity setpoint

SP-5 • Proof air temperature

SP-6 • Proof humidity setpoint

SP-7 • Out of water tripp point

SP-8 • Clean water pan setpoint

SP-9 • Systemintialization

SP-10 • Audio volume

SP-11 • Audio tone

SP-12 • Audio effects

SP-13 • Language options

SP-1	Fahrenheit/Celsius	1.	Press and hold the		until “LEVEL 2”, then “CLOCK SET”
			shows in the display.
		2.	Press	again, then “SP PROG” shows in display.
		3.	After 5 seconds, “ENTER CODE” shows in display.
		4.	Press		and “SP-1, TEMP, UNITS” and
			“oF”or “oC” shows in the display.
		5.	Press the		to change temperature units.
SP-2	Lock/Unlock	6.	Press	and “SP-2, LOCK/UNLOCK PROGRAMMING’
			shows in display, along with either “LOCK” or “UNLOCK”.
		7.	Press	to change lock the programming or unlock the
			programming.
SP-3	Air Temperature Setpoint	8.	Press	and “SP-3, AIRTEMP SETPOINT,” and the
			preset cabinet temperature shows in display.
		9.	Press		to change the air temperature setpoint,
			140o F (60o C) minimum, 210o F (99o C) maximum.
303					4-3