Q18: What should I do when I found that the cutting edges of the output at the corner of
A18: You have not executed the printing test for ”Position calibration”. Execute the printing test for position calibration from “Start/Setup/Printer/HiTi USB Photo Printer 63xPL/Property/Tool”. Make adjustment according to the printing result, and then print your
Q19: How do I execute the printing test for “Position calibration” and adjust the setting?
A19: 1. Click “Start/Setup/Printer/HiTi USB Photo Printer 63xPL/Contnet/Tool”.
2.Click Color Setting/White Skin Optimization/Printing Calibration Sketch to run the printing test.
3.Examine the calibrations of the testing photo output. From the 12345678 of the Area A in the photo, select the number that is horizontally aligned with the torn edge of sticker and fill it in the blank space of the number which is aligned with the Area A on screen horizontally. Then, from the 12345678 of the Area B in the photo, select the number that is vertically aligned with the torn edge of sticker and fill it in blank space of the number vertically aligned with the Area B on screen.
Q20: How do I set up the “Skin Tone Optimal Effect?
A20: To make the skin color more natural in the photo, we provide the function for adjusting the optimal skin color.
1.Click “Start/Setup/Printer/HiTi USB Photo Printer 63xPL/Property/Tool”.
2.Click Color Setting/White Skin Optimization/Printing Calibration Sketch to perform the printing test.
3.Examine the Area C of the printed testing photo, then choose the number for your favorite color, and fill it in the blank space of the number horizontally aligned with the Area C on screen.
Q21: What is the cleaning procedure for the cleaning kit?
A21: Please following the procedure given below for the cleaning:
1.Purchase the cleaning kit.
2.Bend the cotton pad.
3.Spray appropriate amount of cleaning alcohol on the cotton pad.
4.Open the ribbon cartridge cover.
5.Insert the cotton pad into the
6.Clean the
7.Clean the printer thermal head.
8.Close the ribbon cartridge cover.
9.Insert the cotton pad into the
10.Clean the outgoing paper path at the lower edge of the
11.It is ready to print.
98